SPARTACOTE® Vertical HB
- Chemical Family
- Epoxy & Epoxy Derivatives
SPARTACOTE® Vertical HB is a multi-functional, pigmented high build novolac epoxy coating, for interior wall and ceiling applications. Its available in a white gloss finish.
Product families
- Floor Coatings
Other characteristics
- Brand
- SPARTACOTE
- Features
- Low Odor, Low VOC, Stain Resistant
- Product Type
- Epoxy Coating
- Application Method
- Brush, Roller, Wipe
- Compatible Substrates & Surfaces
- Masonry, Metal
- Note
Working properties based on stated temperature and 50% RH. Changes in ambient conditions may cause times to vary.
- Usage
- Clean rooms
- Food & Beverage Processing Facilities
- Commercial Kitchens
- Warehouses/Storage Areas
- Manufacturing & Waste Water Treatment Plants
- Maintenance Garages
- Pharmaceutical & Research Facilities
- Health Care Facilities
- Markets
- Building & Construction
- Cautions
Wear protective gloves, protective clothing and eye protection.; Causes severe skin burns. If skin irritation or rash occurs: get medical advice/attention; Causes serious eye damage. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Call a physician immediately.; If swallowed: Rinse mouth do not induce vomiting. Call a physician immediately.; Keep out of reach of children.
- PACKAGING
- 9809-0005-2 Full Kit
- 5 gal (18.9L) kit
- Part A
- 3.7 gal (14.0L) in a 5 gal pail
- Part B
- 1.3 gal (4.9L) in a 3.5 gal pail
- Advantages
Excellent as a wall & ceiling coating; USDA compliant (FDA/CFSAN U.S. Food Code 6.101.11 Surface Characteristics); Provides excellent chemical resistance and film integrity; Excellent stain resistance; Low odor, low VOC's
- Maintenance
The long-term performance, appearance, and life expectancy of wear surface products are critically dependent upon a good routine maintenance program designed specifically for the installed wear surface. SPARTACOTE floor coating systems are nonporous, causing dirt and contaminants to remain on the surface. The use of properly placed walk-off mats, inside and outside, will help increase the life of the floor. Recommend maintenance program consist of frequent and thorough cleaning utilizing a neutral pH cleaner. The frequency of washing will vary depending on floor usage type, traffic, and age.
Technical data
Table 1 of 3
12 rows| Characteristic | Value | Unit |
|---|---|---|
| Working Time (50°F (10°C)) | 75.0 | minutes |
| Working Time (75°F (24°C)) | 50.0 | minutes |
| Working Time (90°F (32°C)) | 25.0 | minutes |
| Re-Coat Time (50°F(10°C)) | min. 16 - 18 | hours |
| Re-Coat Time (50°F (10°C)) | max. 120 | hours |
| Re-Coat Time (75°F (24°C)) | max. 72 | hours |
| Re-Coat Time (75°F (24°C)) | min. 10 - 20 | hours |
| Re-Coat Time (90°F (32°C)) | max. 48 | hours |
| Re-Coat Time (90°F (32°C)) | min. 6-8 | hours |
| Cure Time (50°F (10°C)) | 96.0 | hours |
| Cure Time (75°F (24°C)) | 24.0 | hours |
| Cure Time (90°F (32°C)) | 20 | hours |
Table 2 of 3
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Adhesion (Concrete Failure) | min. 300 (min. 2.1) | psi(MPa) | — |
| Abrasion Strength (Loss) | 92.0 | mg | ASTM D4060 (1000 cycles C17 Wheel) |
| Specular Gloss | 85 - 90 | — | ASTM D523 |
Table 3 of 3
1 row| Characteristic | Value | Unit |
|---|---|---|
| VOC/LEED (as intended for use) | 10.0 | g/L |
