SPARTACOTE® Surface Build UV
- Chemical Family
- Epoxy & Epoxy Derivatives
SPARTACOTE® Surface Build UV is a high solids, UV resistant, self-leveling epoxy for decorative and protective applications. Ideal for use as a build or topcoat in SPARTACOTE epoxy flooring systems it exhibits excellent durability and wear characteristics combined with high chemical resistance. Provided as a clear epoxy product it can be field pigmented through the use of SPARTACOTE Universal Pigments.
Product families
- Floor Coatings
Other characteristics
- Brand
- SPARTACOTE
- Features
Abrasion Resistant, Chemical Resistant, High Gloss, High Solids Content, Low VOC, Self-Leveling, UV Resistant
- Product Type
- Epoxy Coating
- Application Method
- Brush, Roller, Wipe
- Compatible Substrates & Surfaces
- Masonry
- Note
Working properties based on 70°F (21°C) and 50% RH. Changes in ambient conditions may cause times to vary.
- Usage
- Healthcare facilities
- Educational facilities
- Single & multi-family residential
- Retail spaces
- Manufacturing plants
- Food & Beverage manufacturing
- Stadium & event spaces
- Pharmaceutical & research facilities
- Markets
- Building & Construction
- Cautions
Wear protective gloves, clothing and eye protection.; Causes severe skin burns. If skin irritation or rash occurs: get medical advice/attention.; Causes serious eye damage. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Call a physician immediately.; Harmful if swallowed. Rinse mouth do not induce vomiting. Call a physician immediately.; Keep out of reach of children.
- Advantages
- UV resistant
- Multi-purpose, self-leveling epoxy
- High gloss finish
- Improved leveling and working properties
- Excellent durability and wear resistance
- Acceptable for use in broadcast systems
- May be used to create a trowel down mortar
- Clear epoxy base can be tinted with SPARTACOTE
- Maintenance
The long-term performance, appearance, and life expectancy of wear surface products are critically dependent upon a good routine maintenance program designed specifically for the installed wear surface. SPARTACOTE floor coating systems are nonporous, causing dirt and contaminants to remain on the surface. The use of properly placed walk-off mats, inside and outside, will help increase the life of the floor. Recommend maintenance program consist of frequent and thorough cleaning utilizing a neutral pH cleaner. The frequency of washing will vary depending on floor usage type, traffic, and age.
Technical data
Table 1 of 3
8 rows| Characteristic | Value | Unit |
|---|---|---|
| Solids (by Volume) | 99.0 | % |
| Mix Ratio (by Volume) | 99.0 | % |
| Mix Ratio (A:B) | 3 : 2 | — |
| Recoat Time | max. 12 | hours |
| Recoat Time | min. 60 | minutes |
| Foot Traffic | 5.0 | days |
| Vehicular Traffic | 24.0 | hours |
| Full Cure | 48.0 | hours |
Table 2 of 3
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Adhesion (Concrete Failure) | min. 300 (min. 2.1) | psi(MPa) | ASTM D7234 |
| Tensile Bond Strength | 2,350 (16.2) | psi(MPa) | ASTM D2370 |
| Hardness | 75.0 | Shore D | ASTM D2240 |
| Abrasion Strength (Loss) | 12.0 | mg | ASTM D4060 |
| Impact Resistance | 135 (183) | in-lb(Nm) | ASTM D5420 |
| Mandrel Bend (4 mm) | Pass | — | ASTM D522 |
| Gloss 60 Degree | min. 90 | gu | — |
Table 3 of 3
1 row| Characteristic | Value | Unit |
|---|---|---|
| VOC/LEED (as intended for use) | 19.0 | g/L |
