To catalogue
STONETECH® Impregnator Pro® Sealer
STONETECH® Impregnator Pro® Sealer is a solvent based, penetrating sealer that provides advanced stain protection on natural stone, tile, masonry and grout surfaces. It blocks out oil and water based stains by impregnating into the surface without changing the original look or finish. Effective in interior and exterior applications, STONETECH Impregnator Pro Sealer comes with a 25 year product guarantee.
Product families
Building & Construction — Flooring & Surfaces
- Floor Coatings
Other characteristics
- Brand
- STONETECH
- Features
- Good Penetration, Stain Resistant
- Product Type
- Sealer, Solventborne Coating
- Application Method
- Brush, Roller, Spray
- Compatible Substrates & Surfaces
- Marble, Masonry, Stone
- Odor
- Mild
- Markets
- Building & Construction
- Cautions
- Inhalation
- Move into fresh air and keep at rest. If breathing stops, provide artificial respiration. Get medical attention if any discomfort continues.
- Skin contact
- Flush thoroughly with water for at least15 minutes. Wash skin with soap and water. Get medical attention if irritation develops and persists.
- Eye contact
- Flush thoroughly with water for at least 15 minutes. Remove contact lenses, if present and easy to do. Get medical attention immediately. May cause eye irritation.
- Ingestion
- Immediately rinse mouth and drink plenty of water. Keep person under observation. If person becomes uncomfortable take to hospital along with these instructions. Get medical attention if symptoms occur.
- Disposal Information
- For disposal guidance for unused product, contact a household hazardous waste program or your local or state government environmental control agency.
- Advantages
- Offers advanced stain protection
- Protects natural stone, tile, masonry and grout
- Preserves the original look of the surface
- Solvent-based formula
- For interior and exterior use
- Professional grade
- Shelf LIfe
Factory sealed containers of this product are guaranteed to be of first quality for two (2) years if stored at temperatures >50°F (10°C) and <90°F (32°C).
Technical data
Table 1 of 3
2 rows| Characteristic | Value | Unit |
|---|---|---|
| Full Cure | 24 - 72 | hours |
| Surface Use | 6 – 8 | hours |
Table 2 of 3
2 rows| Characteristic | Value | Unit |
|---|---|---|
| Specific Gravity | 0.761 | — |
| Flash Point | 108 (42) | °F(°C) |
Table 3 of 3
1 row| Characteristic | Value | Unit |
|---|---|---|
| VOC/LEED (as intended for use) | 748.0 | g/L |
