SPARTACOTE® Urethane Floor Sealer WB
SPARTACOTE® Urethane Floor Sealer WB is a two component, water born aliphatic floor coating. Intended for use as a top coat over SPARTACOTE resinous coating systems (epoxy, urethane or polyaspartic), this product offers excellent resistance to UV discoloration, impact & abrasion, and staining. It is available in either a clear satin or clear matte finish.
Other characteristics
- Brand
- SPARTACOTE
- Features
Abrasion Resistant, Good Color Stability, Impact Resistance, Satin Finish, Stain Resistant, UV Resistant
- Product Type
- 2K (2 component) Coating, Sealer, Top Coat
- Compatible Substrates & Surfaces
- Masonry
- Note
Working properties based on stated temperature and 50% RH. Changes in ambient conditions may cause times to vary.
- Usage
- Research facilities
- Laboratories
- Food & Beverage Facilities
- Hospitals
- Markets
- Building & Construction
- Cautions
Wear protective gloves, protective clothing and eye protection.; Causes skin irritation. If skin irritation or rash occurs: get medical advice/attention; Causes serious eye irritation. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do.; If swallowed: Rinse mouth do not induce vomiting. Call a physician immediately.; Keep out of reach of children.; Harmful if inhaled. May cause respiratory irritation.
- PACKAGING
- 9802-0002-2 (Satin) Full Kit
- 2 gal (7.6L) kit
- 9803-0002-2 (Matte) Full Kit
- 2 gal (7.6L.) kit.
- Part A
- 1.5 gal (5.7L) in a 2 gal (7.6L) pail
- Part B
- 0.5 gal (1.9L) in a 1 gal (3.8L) can
- Advantages
- User friendly
- Field and shop application
- Low odor
- Low VOC's
- Soap and water clean up
- Excellent UV resistance
- Excellent adhesion
- Chemical and abrasion resistance
- Maintenance
The long-term performance, appearance, and life expectancy of wear surface products are critically dependent upon a good routine maintenance program designed specifically for the installed wear surface. SPARTACOTE floor coating systems are nonporous, causing dirt and contaminants to remain on the surface. The use of properly placed walk-off mats, inside and outside, will help increase the life of the floor. Recommend maintenance program consist of frequent and thorough cleaning utilizing a neutral pH cleaner. The frequency of washing will vary depending on floor usage type, traffic, and age.
Technical data
Table 1 of 3
10 rows| Characteristic | Value | Unit |
|---|---|---|
| Working Time (50°F (10°C)) | 90.0 | minutes |
| Working Time (75°F (24°C)) | 60.0 | minutes |
| Working Time (90°F (32°C)) | 30.0 | minutes |
| Re-Coat Time (50°F(10°C)) | min. 12 | hours |
| Re-Coat Time (50°F (10°C)) | max. 10 | days |
| Re-Coat Time (75°F (24°C)) | max. 5 | days |
| Re-Coat Time (75°F (24°C)) | min. 6-8 | hours |
| Re-Coat Time (90°F (32°C)) | max. 48 | hours |
| Re-Coat Time (90°F (32°C)) | min. 4-5 | hours |
| Foot Traffic / Vehicular Traffic | min. 24 | hours |
Table 2 of 3
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Strength | 3300 - 3400 (22.7 - 23.4) | psi(MPa) | ASTM 2370 |
| Hardness | 42.0 | Shore D | ASTM D2240 |
| Chemical Resistance (Water with 37% Sulfuric Acid, 6% H₂O₂) | No effect | — | ASTM D1308 (24h spot test) |
| Solids | 65.0 | % | — |
Table 3 of 3
1 row| Characteristic | Value | Unit |
|---|---|---|
| VOC/LEED (as intended for use) | 5.0 | g/L |
