To catalogue
Turbo Fuse Series 150 SI
- Chemical Family
- Cyanoacrylates
Turbo Fuse Series 150 SI advanced formula is designed to polymerize instantly by absorbing surface moisture. The product's performance has been tested with a variety of materials, and is recommended for a multitude of applications. The fast curing qualities make it especially desirable in high speed industrial production. Turbo Fuse Series 150 SI is ideal for use in applications that require an easily handled medium viscosity adhesive.
Product families
Applications
Building & Construction — Building Materials
- Pipes & Plumbing
Industrial — Chemical & Industrial Manufacturing
- Equipment & Parts
Product Families
Ready-to-Use Products — Adhesives & Sealants
- Anaerobic Adhesives
Other characteristics
- Brand
- Turbo Fuse
- Features
Ease of Handling, Fast Curing, General Purpose, High Performance, Medium Viscosity
- Product Type
- 1K (1 component) Adhesive
- Compatible Substrates & Surfaces
- Aluminum, Elastomers & Rubbers, Metal, Steel
- Color
- Transparent
- Markets
- Building & Construction
- Industrial
- Appearance
- Clear liquid, Clear hard (Cured)
- Shelf LIfe
- 1 Year
- Soluble In
- Acetone, MEK, Amide, Methylene Chloride
- Technology
- Ready-to-Use Products
- Quality Standards
- A-A-3097
- MIL-A-46050C
- Ready to Use Product Features
- Ease of Handling
- Fast Curing
- General Purpose
- High Performance
- Medium Viscosity
- Compatible Substrates and Surfaces
- Aluminum
- Elastomers & Rubbers
- Metal
- Steel
Technical data
Table 1 of 3
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Base Compound (Resin) | Surface insensitive ethyl cyanoacrylate | — | — |
| Viscosity | 450 - 550 | cPs | — |
| Specific Gravity | 1.05 | — | — |
| Flash Point | 170 - 200 | °F | Tagliabue closed cup |
Table 2 of 3
6 rows| Characteristic | Value | Unit |
|---|---|---|
| Average Set Time (Full Cure 24 Hours, Rubber) | 5 - 10 | seconds |
| Average Set Time (Full Cure 24 hours, Metal) | 15 - 20 | seconds |
| Average Set Time (Full Cure 24 Hours, Plastic) | 10 - 20 | seconds |
| Average Strength (Steel) | 22.0 | N/mm² |
| Loctite® Equivalent | 447.0 | — |
| Permabond® Equivalent | 795.0 | — |
Table 3 of 3
7 rows| Characteristic | Value | Unit |
|---|---|---|
| Softening Temperature | 300 | °F |
| Service Temperature | -65 to 180 | °F |
| Hardness Barcol | 65 | — |
| Dielectric Constant (at 1 MHz) | 3.33 | — |
| Specific Resistance | 8.6x10² | Ω-cm |
| Tensile Shear Strength | 2500 | psi |
| Gap Filling | 0.007 | inches |
