Turbo Fuse Series 190 Clear Flex
- Chemical Family
- Cyanoacrylates
Turbo Fuse Series 190 Clear Flex advanced formula is designed to polymerize instantly by reacting with surface moisture. The product's performance has been tested with a variety of materials, and is recommended for a multitude of applications that require a relatively thick, viscous adhesive with flexible bondness. The fast curing qualities make it especially desirable in high speed industrial production. It is also ideal for applications on vertical or angled surfaces.
Product families
- Anaerobic Adhesives
Other characteristics
- Brand
- Turbo Fuse
- Features
Ease of Handling, Fast Curing, Flexible, General Purpose, High Performance, Medium Viscosity
- Product Type
- 1K (1 component) Adhesive
- Compatible Substrates & Surfaces
- Aluminum, Elastomers & Rubbers, Metal, Steel
- Color
- Transparent
- Appearance
- Clear liquid, Clear hard (Cured)
- Shelf LIfe
- 1 Year
- Soluble In
- Acetone, MEK, Amide, Methylene Chloride
- Applications
Because of the 4000 viscosity, it works especially well in poor fitting applications such as rough metal or ceramic repair, unfinished metal to metal bonding, and metal to rubber. This product is a very good, thick, almost gel like adhesive.
- Technology
- Ready-to-Use Products
- Ready to Use Product Features
- Ease of Handling
- Fast Curing
- Flexible
- General Purpose
- High Performance
- Medium Viscosity
- Compatible Substrates and Surfaces
- Aluminum
- Elastomers & Rubbers
- Metal
- Steel
Technical data
Table 1 of 3
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Base Compound (Resin) | Ethyl cyanoacrylate | — | — |
| Viscosity | 3500 - 5000 | cPs | — |
| Specific Gravity | 1.05 | — | — |
| Flash Point | 176 - 200 | °F | Tagliabue closed cup |
Table 2 of 3
5 rows| Characteristic | Value | Unit |
|---|---|---|
| Average Set Time (Full Cure 24 hours, Metal) | 20 - 50 | seconds |
| Average Set Time (Full Cure 24 Hours, Plastic) | 15 - 30 | seconds |
| Average Set Time (Full Cure 24 Hours, Rubber) | 5 - 10 | seconds |
| Average Strength (Steel) | 22.0 | N/mm² |
| Loctite® Equivalent | 411.0 | — |
Table 3 of 3
7 rows| Characteristic | Value | Unit |
|---|---|---|
| Softening Temperature | 300 | °F |
| Service Temperature | -65 to 210 | °F |
| Shore Hardness | 80 - 90 | — |
| Dielectric Constant (at 100 kHz) | 2.44/0.44 | — |
| Volume Resistance | 158x10¹² | — |
| Tensile Strength | min. 725 | psi |
| Gap Filling | 0.009 | inches |
