To catalogue
Turbo Fuse Series 170
- Chemical Family
- Cyanoacrylates
Turbo Fuse Series 170 advanced formula is designed to polymerize instantly by absorbing surface moisture. The product's performance has been tested with a variety of materials, and is recommended for a multitude of applications. The fast curing qualities make it especially desirable in high speed industrial production. Turbo Fuse Series 170 is ideal for use in applications that require an easily handled high viscosity adhesive. This formula is widely used in the Aerospace, Automotive and Electronic industries.
Product families
Applications
Applications
- Consumer Goods — Appliances & Electronics
Automotive & Transportation — Bonding & Assembly
- Transportation Assembly
Electrical & Electronics — Packaging & Assembly
- Adhesives & Sealants
Automotive & Transportation — Transportation
- Aerospace & Aviation
Product Families
Ready-to-Use Products — Adhesives & Sealants
- Anaerobic Adhesives
Other characteristics
- Brand
- Turbo Fuse
- Features
Ease of Handling, Fast Curing, General Purpose, High Performance, High Viscosity
- Product Type
- 1K (1 component) Adhesive
- Compatible Substrates & Surfaces
- Aluminum, Elastomers & Rubbers, Metal, Steel
- Color
- Transparent
- Markets
- Automotive & Transportation
- Consumer Goods
- Electrical & Electronics
- Appearance
- Clear liquid, Clear hard (Cured)
- Shelf LIfe
- 1 Year
- Soluble In
- Acetone, MEK, Amide, Methylene Chloride
- Technology
- Ready-to-Use Products
- Quality Standards
- A-A-3097
- MIL-A-46050C
- Ready to Use Product Features
- Ease of Handling
- Fast Curing
- General Purpose
- High Performance
- High Viscosity
- Compatible Substrates and Surfaces
- Aluminum
- Elastomers & Rubbers
- Metal
- Steel
Technical data
Table 1 of 3
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Base Compound (Resin) | Ethyl cyanoacrylate | — | — |
| Viscosity | 1400 - 1700 | cPs | — |
| Specific Gravity | 1.05 | — | — |
| Flash Point | 170 - 200 | °F | Tagliabue closed cup |
Table 2 of 3
6 rows| Characteristic | Value | Unit |
|---|---|---|
| Average Set Time (Full Cure 24 hours, Metal) | 25 - 35 | seconds |
| Average Set Time (Full Cure 24 Hours, Plastic) | 10 - 30 | seconds |
| Average Set Time (Full Cure 24 Hours, Rubber) | 5 - 10 | seconds |
| Average Strength (Steel) | 22.0 | N/mm² |
| Loctite® Equivalent | 416.0 | — |
| Permabond® Equivalent | 240.0 | — |
Table 3 of 3
7 rows| Characteristic | Value | Unit |
|---|---|---|
| Softening Temperature | 300 | °F |
| Service Temperature | -65 to 180 | °F |
| Hardness Barcol | 65 | — |
| Dielectric Constant (at 1 MHz) | 3.33 | — |
| Specific Resistance | 8.6x10² | Ω-cm |
| Tensile Shear Strength | 2500 | psi |
| Gap Filling | 0.008 | inches |
