Turbo Lock Series 13 OR
- Chemical Family
- Esters
Turbo Lock Series 13 OR is a high temperature, high strength, permanent, oil resistant, anaerobic thread-locking compound. It is highly resistance to heat, vibrations, water, gasses, oils, hydrocarbons and many chemicals,disassembles with high heat and hand tools.
Product families
Applications
- Construction Adhesives
- Fence Decks & Rails
- Equipment & Parts
Product Families
- Anaerobic Adhesives
Other characteristics
- Brand
- Turbo Lock
- Features
Chemical Resistant, Excellent Seal Properties, Gas Barrier, Heat Resistance, High Strength, High Temperature Resistance, Hydrocarbon Resistant, Oil Resistant, Vibration Damping, Water Resistant
- Product Type
- Anaerobic Adhesive
- Color
- Red
- Markets
- Building & Construction
- Industrial
- Shelf LIfe
- 2 Years
- Precaution
This product and the auxiliary materials normally combined with it are capable of producing adverse health effects ranging from minor skin irritation to serious systemic effects. None of these materials should be used, stored, or transported until the handling precautions and recommendations as stated in the Material Safety Data Sheets (MSDS).
- Technology
- Ready-to-Use Products
- Application Methods
Surfaces should be dry, clean, and free of any contamination. Thread locker should be applied to the bolt in sufficient quantity to fill threads. This thread locker is specifically formulated to give controlled friction and torque/tension ratio during assembly.
- Storage Information
Anaerobic adhesives are ideally stored in a cool, dry place in unopened containers at a room temperature between 46°F to 82°F. Please do not return unused material to its original container.
- Ready to Use Product Features
- Chemical Resistant
- Excellent Seal Properties
- Gas Barrier
- Heat Resistance
- High Strength
- High Temperature Resistance
- Hydrocarbon Resistant
- Oil Resistant
Technical data
Table 1 of 4
1 row| Characteristic | Value |
|---|---|
| Loctite® Equivalent | 266.0 |
Table 2 of 4
12 rows| Characteristic | Value | Unit |
|---|---|---|
| Initial Strength Retained for Acetone (at 22ºC, 500hrs) | 100 | % |
| Initial Strength Retained for Ethanol (at 22ºC, 500hrs) | 100 | % |
| Initial Strength Retained for Motor Oil (at 125ºC, 500hrs) | 100 | % |
| Initial Strength Retained for Gasoline (at 22ºC, 500hrs) | 100 | % |
| Initial Strength Retained for Brake Fluid (at 22ºC, 500hrs) | 100 | % |
| Initial Strength Retained for Water/Glycol (at 87ºC, 500hrs) | 90 | % |
| Initial Strength Retained for Acetone (at 22ºC, 1000hrs) | 90 | % |
| Initial Strength Retained for Ethanol (at 22ºC, 1000hrs) | 100 | % |
| Initial Strength Retained for Motor Oil (at 125ºC, 1000hrs) | 100 | % |
| Initial Strength Retained for Gasoline (at 22ºC, 1000hrs) | 100 | % |
| Initial Strength Retained for Brake Fluid (at 22ºC, 1000hrs) | 100 | % |
| Initial Strength Retained for Water/Glycol (at 87ºC, 1000hrs) | 80 | % |
Table 3 of 4
8 rows| Characteristic | Value | Unit |
|---|---|---|
| Handling Cure Time | 20 - 40 | minutes |
| Functional Cure Time | 1 - 3 | hrs |
| Full Cure Time | 24 | hrs |
| Shear Strength | 8 - 12 | N/mm² |
| Locking Torque (Break) | 25 - 35 | N.m |
| Locking Torque (Prevailing) | 6 - 11 | N.m |
| Breakloose Torque | 25 - 35 | N.m |
| Temperature Range | -65 to 450 | ºF |
Table 4 of 4
7 rows| Characteristic | Value | Unit |
|---|---|---|
| Color | Red/orange | — |
| Composition | Methacrylate ester | — |
| Viscosity (at 20 rpm, 25ºC, Brookfield RVT Spindle 3) | 3750 | cPs |
| Specific Gravity | 1.17 | — |
| Maximum Screw Size | ¾ (20) | inches (mm) |
| Flash Point | min. 95 | ºC |
| Solvent Content | None | — |
