To catalogue
Turbo Fuse Series 120 SI
- Chemical Family
- Cyanoacrylates
Turbo Fuse Series 120 SI advanced formula is designed to polymerize instantly by absorbing surface moisture. The product's performance has been tested with a variety of materials, and is recommended for a multitude of applications. The fast curing qualities make it especially desirable in high speed industrial production. Turbo Fuse is ideal for use in applications that require good "wicking" characteristics and/or in close fitting applications.
Product families
Applications
Building & Construction — Building Materials
- Pipes & Plumbing
Industrial — Chemical & Industrial Manufacturing
- Equipment & Parts
Product Families
Ready-to-Use Products — Adhesives & Sealants
- Anaerobic Adhesives
Other characteristics
- Brand
- Turbo Fuse
- Features
Fast Curing, General Purpose, Good Wicking, High Performance
- Product Type
- 1K (1 component) Adhesive
- Compatible Substrates & Surfaces
- Aluminum, Elastomers & Rubbers, Metal, Steel
- Color
- Transparent
- Markets
- Building & Construction
- Industrial
- Appearance
- Clear liquid, Clear hard (Cured)
- Shelf LIfe
- 1 Year
- Soluble In
- Acetone, MEK, Amide, Methylene Chloride
- Technology
- Ready-to-Use Products
- Quality Standards
- A-A-3097
- MIL-A-46050C
- Ready to Use Product Features
- Fast Curing
- General Purpose
- Good Wicking
- High Performance
- Compatible Substrates and Surfaces
- Aluminum
- Elastomers & Rubbers
- Metal
- Steel
Technical data
Table 1 of 3
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Base Compound (Resin) | Surface insensitive ethyl cyanoacrylate | — | — |
| Viscosity | 35 - 45 | cPs | — |
| Specific Gravity | 1.05 | — | — |
| Flash Point | 170 - 200 | °F | Tagliabue closed cup |
Table 2 of 3
5 rows| Characteristic | Value | Unit |
|---|---|---|
| Average Set Time (Full Cure 24 hours, Metal) | 8 - 10 | seconds |
| Average Set Time (Full Cure 24 Hours, Plastic) | 5 - 10 | seconds |
| Average Set Time (Full Cure 24 Hours, Rubber) | 2 - 5 | seconds |
| Average Strength (Steel) | 22.0 | N/mm² |
| Permabond® Equivalent | 791.0 | — |
Table 3 of 3
6 rows| Characteristic | Value | Unit |
|---|---|---|
| Softening Temperature | 300 | °F |
| Service Temperature | -65 to 180 | °F |
| Hardness Barcol | 65 | — |
| Dielectric Constant (at 1 MHz) | 3.33 | — |
| Specific Resistance | 8.6x10² | Ω-cm |
| Gap Filling | 0.004 | inches |
