Turbo Seal Series 52

Chemical Family: Esters

Turbo Seal Series 52 is an anaerobic gasket sealant, which develops medium strength in a short time. The compound cures in the absence of air between close fitting surfaces. Provides resistance to low pressure immediately after assembly of flanges.

Properties

Physical Form: Gel

Product families

Applications

Industrial — Chemical & Industrial Manufacturing

Equipment & Parts
Industrial Adhesives & Sealants

Adhesives & Sealants — Industrial & Assembly Adhesives

Industrial Manufacturing

Product Families

Ready-to-Use Products — Adhesives & Sealants

Anaerobic Adhesives

Other characteristics

Brand: Turbo Seal
Features: Chemical Resistant, Good Rigidity, Good Strength, High Temperature Performance, Thixotropic
Product Type: Anaerobic Adhesive
Application Area: Gaskets, Gearboxes
Gaskets
Gearboxes
Color: Red
Markets: Adhesives & Sealants
Industrial
Shelf LIfe: 1 Year
Precaution: This product and the auxiliary materials normally combined with it are capable of producing adverse health effects ranging from minor skin irritation to serious systemic effects. None of these materials should be used, stored, or transported until the handling precautions and recommendations as stated in the Material Safety Data Sheets (MSDS).
Technology: Ready-to-Use Products
Use Direction: For best results, clean all surfaces (external and internal) with a cleaning solvent and allow the solvent to evaporate; If the material is an inactive metal or the cure speed is too slow, spray with an Activator and allow to dry; Apply manually as a continuous bead or by screen-painting to one of surface flanges; Low pressure can be used when testing to confirm a complete seal immediately after assembly; Flanges should be tightened as soon as possible after assembly to avoid shimming
Storage Information: Anaerobic adhesives are ideally stored in a cool, dry place in unopened containers at a room temperature between 46°F to 86°F. Do not return unused material to its original container.
Ready to Use Product Features: Chemical Resistant
Good Rigidity
Good Strength
High Temperature Performance
Thixotropic

Technical data

Table 1 of 5

3 rows

Characteristic	Value	Unit	Method
Coefficient of Thermal Expansion	80x10⁻⁶	K-1	ASTM D 696
Coefficient of Thermal Conductivity	0.1	W/(m.K)	ASTM C 177
Specific Heat	0.3	kJ/(kg.K)	—

Table 2 of 5

5 rows

Characteristic	Value	Unit
Primed Average Cure Time	30 min - 4 hrs	—
Unprimed Average Cure Time	4 - 24	hours
Loctite® Equivalent	510.0	—
Permabond® Equivalent	MH196	—
Permatex® Equivalent	51031.0	—

Table 3 of 5

12 rows

Characteristic	Value	Unit
Initial Strength Retained for Acetone (at 22ºC, 500hrs)	100	%
Initial Strength Retained for Ethanol (at 22ºC, 500hrs)	90	%
Initial Strength Retained for Motor Oil (at 125ºC, 500hrs)	100	%
Initial Strength Retained for Gasoline (at 22ºC, 500hrs)	75	%
Initial Strength Retained for Brake Fluid (at 22ºC, 500hrs)	95	%
Initial Strength Retained for Water/Glycol (at 87ºC, 500hrs)	110	%
Initial Strength Retained for Acetone (at 22ºC, 1000hrs)	95	%
Initial Strength Retained for Ethanol (at 22ºC, 1000hrs)	85	%
Initial Strength Retained for Motor Oil (at 125ºC, 1000hrs)	100	%
Initial Strength Retained for Gasoline (at 22ºC, 1000hrs)	75	%
Initial Strength Retained for Brake Fluid (at 22ºC, 1000hrs)	95	%
Initial Strength Retained for Water/Glycol (at 87ºC, 1000hrs)	110	%

Table 4 of 5

6 rows

Characteristic	Value	Unit	Method
Handling Cure Time (Unprimed Surfaces)	2 - 8	hrs	—
Handling Cure Time (Primed Surfaces)	0.5 - 4	hrs	—
Compressive Shear Strength of Steel Pins and Collars (After 24 hrs, at 22ºC)	min. 7.5 (1,085)	N/mm² (psi)	ISO 10123
Lap Shear Strength (Steel Grit Based)	5 (725)	N/mm² (psi)	ISO 4587
Tensile Strength (Steel Grit Based)	7.5 (1,085)	N/mm² (psi)	ISO 6922
Temperature Range	-65 to 400	ºF	—

Table 5 of 5