To catalogue
Turbo Fuse Series 155 HT
- Chemical Family
- Cyanoacrylates
Turbo Fuse Series 155 HT advanced formula is designed to polymerize instantly by absorbing surface moisture and is recommended for a multitude of applications that have high temperature, humidity, and vibration. The fast curing qualities make it especially desirable in high speed industrial production. Turbo Fuse Series 155 HT is ideal for use in applications that require a high temperature adhesive. For extreme gap fill, the use of an accelerator is highly recommended.
Product families
Ready-to-Use Products — Adhesives & Sealants
- Anaerobic Adhesives
Other characteristics
- Brand
- Turbo Fuse
- Features
Fast Curing, Good Gap Filling Capabilities, High Performance, High Temperature Performance, Humidity Resistant, Thixotropic, Vibration Damping
- Product Type
- 1K (1 component) Adhesive
- Compatible Substrates & Surfaces
- Aluminum, Elastomers & Rubbers, Metal, Steel
- Color
- Transparent
- Appearance
- Clear liquid, Clear hard (Cured)
- Shelf LIfe
- 1 Year
- Soluble In
- Acetone, MEK, Amide, Methylene Chloride
- Technology
- Ready-to-Use Products
- Certifications and Compliance
- USP Class VI
- Ready to Use Product Features
- Fast Curing
- Good Gap Filling Capabilities
- High Performance
- High Temperature Performance
- Humidity Resistant
- Thixotropic
- Vibration Damping
- Compatible Substrates and Surfaces
- Aluminum
- Elastomers & Rubbers
- Metal
- Steel
Technical data
Table 1 of 3
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Base Compound (Resin) | Ethyl cyanoacrylate | — | — |
| Viscosity | 650 - 750 | cPs | — |
| Specific Gravity | 1.06 | — | — |
| Flash Point | min. 185 | °F | Tagliabue closed cup |
Table 2 of 3
5 rows| Characteristic | Value | Unit |
|---|---|---|
| Average Set Time (Full Cure 24 Hours, Plastic) | 5 - 10 | seconds |
| Average Set Time (Full Cure 24 Hours, Rubber) | 5 - 10 | seconds |
| Average Set Time (Full Cure 24 hours, Metal) | 10 - 30 | seconds |
| Average Strength (Steel) | 22.0 | N/mm² |
| Loctite® Equivalent | 4204.0 | — |
Table 3 of 3
7 rows| Characteristic | Value | Unit |
|---|---|---|
| Operating Temperature Range | -58 to 221 | °F |
| Hot Strength (at 70°F) | 100 | % |
| Hot Strength (at 221°F) | 45 | % |
| Hot Strength (at 248°F) | 25 | % |
| Hot Strength (at 257°F) | Intermittent | % |
| Tensile Strength | 21 | N/mm² |
| Gap Filling | 0.007 | inches |
