Stanyl® TW275F6

Chemical Family: Polyamides

Stanyl® TW275F6 is a high-performance polyamide that provides unmatched performance and value for demanding applications in which superior heat resistance, design stiffness, wear and friction, and process flow qualities are required. This high-performance polyamide 46 is used for applications in automotive, E&E, gears, and outdoor power equipment. Since it retains its mechanical properties at high temperatures up to 220 °C, this makes it ideal for extremely high-performance applications, where it outperforms PPA, PA6T, PA9T, and often PPS and LCP. A suitable processing technology for the product is injection molding. Special features include being heat stabilized, wear modified, and friction modified.

Product families

Applications

Automotive & Transportation — Automotive

Electrical & Electronic Systems
Powertrain & UTH

Product Families

Plastics — Engineering & Specialty Polymers

Polyamides

Other characteristics

Brand: Stanyl
Polymer Name: Polyamide 46 (PA 46)
Fillers Included: Glass Fiber
Flexural Modulus: 9000.0 - 9000.0 MPa
Additives Included: Heat Stabilizer, Lubricant (PTFE)
Heat Stabilizer
Lubricant (PTFE)
Processing Methods: Injection Molding
Markets: Automotive & Transportation
Technology: Plastics
Packaging Type: Bags
Boxes
Silos
Super Sacks
Material Features: Friction Resistant
Heat Resistance
Heat Stabilized
Low Friction
Low Wear
Wear Resistant
Certifications and Compliance: ISO 14001
OHSAS
REACH (Europe)
Plastics and Elastomers Functions: Resin
Grade Coding for Injection Molding: Stanyl® PA46 reinforced injection molding grades.

Technical data

Table 1 of 6

20 rows

Characteristic	Value	Unit	Method
Tensile Modulus (-40°C)	10000 / -	MPa	ISO 527-1/-2
Stress at Break	205 / 115	MPa	ISO 527-1/-2
Stress at Break (-40°C)	240 / -	MPa	ISO 527-1/-2
Stress at Break (120°C)	110 / -	MPa	ISO 527-1/-2
Stress at Break (160°C)	100 / *	MPa	ISO 527-1/-2
Stress at Break (180°C)	95 / *	MPa	ISO 527-1/-2
Stress at Break (200°C)	90 / *	MPa	ISO 527-1/-2
Strain at Break	3.5 / 7	%	ISO 527-1/-2
Strain at Break (at -40°C)	3.2 / -	%	ISO 527-1/-2
Strain at Break (at 120°C)	8.4 / -	%	ISO 527-1/-2
Strain at Break (at 160°C)	8.9 / *	%	ISO 527-1/-2
Strain at Break (at 180°C)	9.1 / *	%	ISO 527-1/-2

Table 2 of 6

7 rows

Characteristic	Value	Unit	Method
Melting Temperature (10°C/min)	295 / *	°C	ISO 11357-1/-3
Glass Transition Temperature (at 10°C/min)	75 / *	°C	ISO 11357-1/-2
Temperature of Deflection Under Load (1.80 MPa)	285 / *	°C	ISO 75-1/-2
Temperature of Deflection Under Load (0.45 MPa)	290 / *	°C	ISO 75-1/-2
Vicat Softening Temperature (50°C/h 50N)	290 / *	°C	ISO 306
Coefficient of Linear Thermal Expansion (parallel)	0.25 / *	E-4/°C	ISO 11359-1/-2
Coefficient of Linear Thermal Expansion (normal)	0.6 / *	E-4/°C	ISO 11359-1/-2

Table 3 of 6

1 row

Characteristic	Value	Unit	Method
Viscosity Number	145 / *	cm³/g	ISO 307, 1157, 1628

Table 4 of 6

4 rows

Characteristic	Value	Unit	Method
Water Absorption	9 / *	%	Sim. to ISO 62
Water Absorption in Water (at 23°C after 24h)	2.6 / *	%	ISO 62
Humidity Absorption	2.5 / *	%	Sim. to ISO 62
Density	1430 / -	kg/m³	ISO 1183

Table 5 of 6

2 rows

Characteristic	Value	Unit	Method
Molding Shrinkage (parallel)	0.5 / *	%	Sim. to ISO 294-4
Molding Shrinkage (normal)	1.3 / *	%	Sim. to ISO 294-4

Химическая стойкость

377 rows

Characteristic	Value	Unit
Other	Acetaldehyde (40% by mass) at 23°C	resistant
Other	Acetamide (50% by mass) at 23°C	limited resistant, tests necessary to verify
Other	Acetamide (50% by mass) at >140°C	not resistant
Other	Acetic acid (10% by mass) at 100°C	not resistant
Other	Acetic acid (10% by mass) at 23°C	limited resistant, tests necessary to verify
Other	Acetic acid (95% by mass) at 23°C	not resistant
Ketones	Acetone at 23°C	resistant
Other	Acetophenone at 23°C	resistant
Other	Acetyl chloride at 23°C	not resistant
Other	Acetylene at 23°C	resistant
Other	Acrylic acid at 23°C	not resistant
Other	Aliphatic amines at 23°C	resistant