Akulon® Ultraflow XG-FKGS6
- Chemical Family
- Polyamides
Akulon® Ultraflow XG-FKGS6 is a high-performance polyamide 6 and polyamide 66 material trusted worldwide for applications in automotive, electronics, electrical, furniture, and packaging. In molded parts, it delivers an impressive blend of design simplicity and processing ease, along with exceptional mechanical properties across a wide temperature range and diverse conditions. For extrusion, it sets industry benchmarks, featuring remarkable strength, resilience, and ease of processing. This product boasts special features including 30% glass reinforcement, flame retardancy (halogen-free), and being best suited for injection molding.
Other characteristics
- Brand
- Akulon®
- Polymer Name
- Polyamide 6 (PA 6)
- Fillers Included
- Glass Fiber
- Processing Methods
- Injection Molding, Injection Molding
- Reinforcement Material
- Glass Fibers
- Markets
- Automotive & Transportation
- Electrical & Electronics
- Flame Rating
- UL 94 5VA
- UL 94 V0
- Technology
- Composite Materials
- Plastics
- Packaging Type
- Bags
- Boxes
- Silos
- Super Sacks
- Labeling Claims
- Halogen-free
- Quality Standards
- UL Yellow Card (E47960)
- Material Features
- Dimensional Stability
- Flame Retardant
- High Dielectric Strength
- High Thermo-Oxidative Stability
- Light Weight
- Thermal Shock Resistant
- UL Flame Rated
- Reinforcement Form
- Tape
- Unidirectional Fabric
- Certifications and Compliance
- ISO 14001
- OHSAS
- REACH (Europe)
- UL 94
- Contactors Application Data
Akulon® PA6 and ForTii® PA4T allow for reliable solutions due to good electrical and thermal endurance. Akulon® PA6 and ForTii® PA4T allow for more design freedom and/or potential system cost reductions due to part integration and thinner wall design and lower profiles possibilities, reduced cycle time with lower production losses
- Composite Materials Functions
- Resins Binders & Matrix Materials
- Composites Processing Methods
- Injection Molding
- MCCB Housings Application Data
Akulon® PA6 and ForTii® PA4T enable increased design flexibility and integrated functionality, facilitating smart assembly solutions; Akulon® PA6 and ForTii® PA4T allow for reliable solutions due to good dielectric aging performance at 150°C and high CTI values at 600 Volts; Akulon® PA6 and ForTii® PA4T allow for potential system cost reductions up to 15% ( wall thicknesses reduced leading to a volume reduction of up to 25%) compared to conventional materials
- Plastics and Elastomers End Uses
- Automotive Electronics
- Contactors
- Door Panel
- EV Charging Plugs
- Flooring
- Gears
- Housings
- Residual Current Breaker With Overload
Technical data
Table 1 of 6
15 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Modulus | 11500 / 7500 | MPa | ISO 527-1/-2 |
| Tensile Modulus (-40°C) | 12000 / - | MPa | ISO 527-1/-2 |
| Tensile Modulus (40°C) | 11000 / - | MPa | ISO 527-1/-2 |
| Tensile Modulus (100°C) | 5200 / - | MPa | ISO 527-1/-2 |
| Stress at Break | 140 / 90 | MPa | ISO 527-1/-2 |
| Stress at Break (-40°C) | 190 / - | MPa | ISO 527-1/-2 |
| Stress at Break (100°C) | 70 / - | MPa | ISO 527-1/-2 |
| Strain at Break | 2.7 / 4 | % | ISO 527-1/-2 |
| Strain at Break (at -40°C) | 2.7 / - | % | ISO 527-1/-2 |
| Flexural Modulus | 11200 / 7850 | MPa | ISO 178 |
| Flexural Strength | 230 / 160 | MPa | ISO 178 |
| Charpy Impact Strength (at +23°C) | 60 / 60 | kJ/m² | ISO 179/1eU |
Table 2 of 6
15 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Temperature of Deflection Under Load (1.80 MPa) | 205 / * | °C | ISO 75-1/-2 |
| Burning Behaviour (at 1.5 mm Nominal Thickness) | UL V-0 / * | class | IEC 60695-11-10 |
| Burning Behaviour (at 3.0 mm Nominal Thickness) | UL V-0 / * | class | IEC 60695-11-10 |
| Burning Behaviour (at 0.75 mm Nominal Thickness) | V-0 / * | class | IEC 60695-11-10 |
| Burning Behaviour 5V (at 1.5 mm thickness h) | UL 5VA / * | class | IEC 60695-11-20 |
| Glow Wire Flammability Index (at thickness 1.6 / - mm) | 960 / - | °C | IEC 60695-2-12 |
| Glow Wire Flammability Index (at thickness 0.8 / - mm) | 960 / - | °C | IEC 60695-2-12 |
| Glow Wire Ignition Temperature (at thickness 1.6 / - mm) | 775 / - | °C | IEC 60695-2-13 |
| Glow Wire Ignition Temperature (at thickness 1 / - mm) | 775 / - | °C | IEC 60695-2-13 |
| Relative Temperature Index (Electrical, 0.75 / * mm) | 140 / * | °C | UL746B |
| Relative Temperature Index (Electrical, 3 / * mm) | 140 / * | °C | UL746B |
| Relative Temperature Index (with impact, 0.75 / * mm) | 110 / * | °C | UL746B |
Table 3 of 6
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Electric Strength | 40 / - | kV/mm | IEC 60243-1 |
| Comparative Tracking Index | - / 600 | V | IEC 60112 |
Table 4 of 6
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Humidity Absorption | 1.7 / * | % | Sim. to ISO 62 |
| Density | 1470 / - | kg/m³ | ISO 1183 |
Table 5 of 6
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Molding Shrinkage (parallel) | 0.2 / * | % | Sim. to ISO 294-4 |
| Molding Shrinkage (normal) | 0.6 / * | % | Sim. to ISO 294-4 |
Химическая стойкость
385 rows| Characteristic | Value | Unit |
|---|---|---|
| Other | Acetaldehyde (40% by mass) at 23°C | limited resistant, tests necessary to verify |
| Other | Acetamide (50% by mass) at 23°C | limited resistant, tests necessary to verify |
| Other | Acetamide (50% by mass) at >140°C | not resistant |
| Other | Acetic acid (10% by mass) at 100°C | not resistant |
| Other | Acetic acid (10% by mass) at 23°C | limited resistant, tests necessary to verify |
| Other | Acetic acid (95% by mass) at 23°C | not resistant |
| Ketones | Acetone at 23°C | resistant |
| Other | Acetophenone at 23°C | resistant |
| Other | Acetyl chloride at 23°C | not resistant |
| Other | Acetylene at 23°C | resistant |
| Other | Acrylic acid at 23°C | not resistant |
| Other | Aliphatic amines at 23°C | resistant |
