Dural Fast Set Gel
- Chemical Family
- Epoxy & Epoxy Derivatives
Dural Fast Set Gel is a two-component, 100% solids, moisture insensitive, rapid-setting epoxy adhesive and binder for numerous applications. This high modulus, structural gel is perfect for bonding applications that require a quick turnaround. DURAL FAST SET GEL can be used in temperatures as low as 40ºF and rising.
Properties
- Physical Form
- Gel
Product families
Applications
- Construction Adhesives
- Equipment & Parts
- Repair Adhesives
Product Families
- Contact Adhesives
Other characteristics
- Brand
- Dural
- Product Type
2K (2 component) Adhesive, Epoxy Adhesive, Solvent free (100% Solids) Adhesive; 2K (2 component) Adhesive; Epoxy Adhesive; Solvent free (100% Solids) Adhesive
- Application Area
- Bolts
- Compatible Substrates & Surfaces
- Concrete, Metal, Steel, Wood
- Markets
- Adhesives & Sealants
- Building & Construction
- Industrial
- Clean Up
Clean tools and application equipment immediately with acetone, xylene, or MEK. Clean spills or drips with the same solvents while still wet. Hardened DURAL FAST SET GEL will require mechanical abrasion for removal.
- Coverage
For anchoring, 1 neat gal yields 231in³ of epoxy. 1 gal of neat DURAL FAST SET GEL epoxy mixed with 1 gal of dry 20/40 mesh silica sand will yield approximately 368in³ of mortar. Note - Coverage rates are approximate. Actual coverage depends on temperature, texture, and substrate porosity.
- PACKAGING
- 4 gal unit, Code
- TD5323104NC
- 10 gal unit, Code
- TD5323110NC
- 22 oz dual cartridge (case of 12), Code
- TD5323122NC
- 10 oz single cartridge (case of 24), Code
- TD5323115NC
- Shelf LIfe
- 2 years in original, unopened package.
- Technology
- Ready-to-Use Products
- Packaging Type
- Cartridges
- Benefits and Features
- Exceptional adhesion to construction materials
- Easy to use 1:1 mix ratio
- Moisture insensitive
- Rapid strength gain in a wide temperature range
- Primary Applications
Bonding of concrete, masonry, steel, or wood.; Anchoring bolts, dowels, or pins.; Rapidly seal cracks and set ports prior to injection.; Mix with sand to create a repair mortar.; Pick-proof sealant for jails/prisons and kennels.
- Specifications and Compliances
Complies with ASTM C881 Types I and IV, Grade 3, Classes B and C; Meets the requirements of AASHTO M 235; Canadian MTQ
- Ready to Use Product Features
- Fast Setting
- Good Adhesion
- High Modulus
- Moisture Resistant
- Wide Temperature Operating Range
- Compatible Substrates and Surfaces
- Concrete
- Metal
- Steel
- Wood
Technical data
Table 1 of 1
14 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Consistency | 3.2 | mm | ASTM C881 |
| Gel Time | 8.0 | minutes | ASTM C881 |
| Bond Strength (2 Days) | 2600.0 | psi | ASTM C882 |
| Bond Strength (14 Days) | 3000.0 | psi | ASTM C882 |
| Water Absorption (24h) | 0.3 | % | ASTM D570 |
| Heat Deflection Temperature | 145.0 | °F | ASTM D648 |
| Linear Coefficient of Shrinkage | 0.001 | — | ASTM D2566 |
| Compressive Yield (1h) | 15500.0 | psi | ASTM D695 |
| Compressive Yield (4h) | 4000.0 | psi | ASTM D695 |
| Compressive Yield (8h) | 6950.0 | psi | ASTM D695 |
| Compressive Yield (7 Days) | 11400.0 | psi | ASTM D695 |
| Compressive Modulus (7 Days) | 12500.0 | psi | ASTM D695 |
