To catalogue
Euclid Chemical Duralprep A.C.
Duralprep A.C. is a three-component bonding agent and anti-corrosion coating for reinforcing steel. It is a pre-proportioned kit that contains a water-based epoxy, combined with portland cement that can be used as a bonding agent for placing fresh concrete and repairing mortars to existing concrete substrates. DURALPREP A.C. contains a corrosion inhibitor that protects reinforcement when used as an anti-corrosion coating for steel. DURALPREP A.C. has a long open time, is non-flammable, VOC compliant, and does not form a water vapor barrier after cure.
Product families
Ready-to-Use Products — Paints & Coatings
- Protective Coatings
Other characteristics
- Features
- Corrosion Resistant, Low VOC
- Product Type
- 3K Coating
- Application Method
- Brush, Spray
- Compatible Substrates & Surfaces
- Concrete, Metal, Steel
- Markets
- Adhesives & Sealants
- Building & Construction
- Clean Up
Clean tools and application equipment immediately with water. Clean spills or drips with water while still wet. Hardened DURALPREP A.C. will require mechanical abrasion for removal.
- PACKAGING
- 3.75 gal unit, Code
- TD235383 7CK
- 1 gal unit (2 per case), Code
- TD2353899
- Shelf LIfe
- 2 years in original, unopened package.
- Technology
- Ready-to-Use Products
- Labeling Claims
- Non-Flammable
- Pot Life (2 gal)
- 35 - 40
- Benefits and Features
- Long open time
- Contains a corrosion inhibitor
- Ease of application (brush/spray)
- Non-flammable
- Does not form a vapor barrier
- Application Methods
- Brush
- Spray
Technical data
Table 1 of 1
12 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Mix Ratio | 3696 | gal:gal:lbs | — |
| VOC Content | 15.0 | g/L | — |
| Contact Time (Temperature Dependent) | 24.0 | h | — |
| Compressive Strength (3 Days) | 2900.0 | psi | ASTM C109 |
| Compressive Strength (7 Days) | 4100.0 | psi | ASTM C109 |
| Compressive Strength (28 Days) | 4500.0 | psi | ASTM C109 |
| Flexural Strength | min. 1280 | psi | ASTM C348 |
| Hardness | 90 - 95 | Shore D | ASTM D2240 |
| Bond Strength (7 Days, 1h Open Time) | 2480.0 | psi | ASTM C882 |
| Bond Strength (7 Days, 24h Open Time) | 2700.0 | psi | ASTM C882 |
| Split Tensile Strength (28 Days) | min. 600 | psi | ASTM C496 |
| Water Vapor Transmission | 0.16 | grains/hr.ft² | ASTM E96 |
