Dural HS Gel Class A
- Chemical Family
- Epoxy & Epoxy Derivatives
Dural HS Gel Class A is a two-component, 1:1 mix ratio, a structural epoxy system that offers exceptional strength in anchoring and doweling applications and can be installed from 40°F to 110°F. DURAL HS GEL has been tested by ASTM E488 and ASTM E1512 for its ability to resist static, dynamic, seismic, and wind loads in uncracked concrete for both threaded rod and rebar.
Properties
- Physical Form
- Gel
Product families
- Structural Adhesives
Other characteristics
- Brand
- Dural
- Product Type
2K (2 component) Adhesive, Epoxy Adhesive, Structural Adhesive; 2K (2 component) Adhesive; Epoxy Adhesive; Structural Adhesive
- Application Area
- Bolts
- Compatible Substrates & Surfaces
- Concrete
- Markets
- Adhesives & Sealants
- Building & Construction
- Industrial
- Clean Up
Clean tools and application equipment immediately with acetone, xylene, or MEK. Clean spills or drips with the same solvents while still wet. Hardened DURAL HS GEL will require mechanical abrasion for removal.
- Coverage
- One 21.2 oz cartridge yields 38.3in3 of epoxy.
- One 53 oz cartridge yields 97.6in3 of epoxy.
- Pot Life
- 13.0
- PACKAGING
DURAL HS GEL is packaged in cases of 21.2 oz cartridges (12 cartridges per case). Cases of 53 oz cartridges (6 cartridges per case) are available on a made to order (MTO) basis, and may be subject to minimum order quantities. The mix ratio is 1:1 by volume.
- Shelf LIfe
28 months when stored in unopened containers in dry conditions. Store between 40°F and 95°F.
- Technology
- Ready-to-Use Products
- Packaging Type
- Cartridges
- Labeling Claims
- Non-Corrosive
Technical data
Table 1 of 1
9 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Consistency | 6.4 | mm | ASTM C881 |
| Gel Time (60g Mass) | 38.0 | minutes | ASTM C881 |
| Bond Strength (2 Days) | 2850.0 | psi | ASTM C882 |
| Bond Strength (14 Days) | 2790.0 | psi | ASTM C882 |
| Water Absorption (14 Days) | 0.53 | % | ASTM D570 |
| Heat Deflection Temperature (7 Days) | 132.0 | °F | ASTM D648 |
| Linear Coefficient of Shrinkage | 0.002 | — | ASTM D2566 |
| Compressive Yield (7 Days) | 10860.0 | psi | ASTM D695 |
| Compressive Modulus (7 Days) | 209000.0 | psi | ASTM D695 |
