Dural Fast Set LV
- Chemical Family
- Epoxy & Epoxy Derivatives
v is a two-component, 100% solids, moisture insensitive, rapid-setting epoxy adhesive and binder for numerous applications. This high modulus, low viscosity epoxy resin is the perfect solution for general bonding applications and for injecting cracks in concrete and a variety of other substrates. DURAL FAST SET LV can be used in temperatures as low as 40ºF and rising.
Product families
Applications
- Construction Adhesives
- Equipment & Parts
- Repair Adhesives
Product Families
- Contact Adhesives
Other characteristics
- Brand
- Dural
- Product Type
2K (2 component) Adhesive, Epoxy Adhesive, Solvent free (100% Solids) Adhesive; 2K (2 component) Adhesive; Epoxy Adhesive; Solvent free (100% Solids) Adhesive
- Application Area
- Bolts
- Compatible Substrates & Surfaces
- Concrete, Wood
- Markets
- Adhesives & Sealants
- Building & Construction
- Industrial
- Clean Up
Clean tools and application equipment immediately with acetone, xylene, or MEK. Clean spills or drips with the same solvents while still wet. Hardened DURAL FAST SET LV will require mechanical abrasion for removal.
- Coverage
For injection, 1 neat gal yields 231in³ of epoxy. 1 gal of neat DURAL FAST SET LV epoxy mixed with 3 gal of dry 20/40 mesh silica sand will yield approximately 643in³ of mortar.. Note - Coverage rates are approximate. Actual coverage depends on temperature, texture, and substrate porosity.
- PACKAGING
- 4 gal unit, Code
- TD5324104
- 10 gal unit, Code
- TD5324110
- 22 oz dual cartridge (case of 12), Code
- TD5324122
- 10 oz single cartridge (case of 24), Code
- TD5324115
- Shelf LIfe
- 2 years in original, unopened package.
- Technology
- Ready-to-Use Products
- Packaging Type
- Cartridges
- Benefits and Features
- Exceptional adhesion to construction materials
- Low viscosity penetrates deep into cracks
- Easy to use 1:1 mix ratio
- Moisture insensitive
- Tenacious bond strength
- Primary Applications
Bonding of concrete, masonry or wood; Injection resin for cracked, structural substrates; Gravity feed cracks in concrete slabs; Mix with dried silica sand to create a repair mortar
- Specifications and Compliances
Complies with ASTM C881 Types I and IV, Grade 1, Classes B and C; Meets the requirements of AASHTO M 235; Canadian MTQ
- Ready to Use Product Features
- Fast Setting
- Good Adhesion
- Good Bonding Strength
- High Modulus
- Low Viscosity
- Moisture Resistant
- Wide Temperature Operating Range
- Compatible Substrates and Surfaces
- Concrete
- Wood
Technical data
Table 1 of 1
14 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Mixed Viscosity | 800.0 | cP | ASTM D2556 |
| Gel Time | 6.0 | minutes | ASTM C881 |
| Bond Strength (2 Days) | 2300.0 | psi | ASTM C882 |
| Bond Strength (14 Days) | 2600.0 | psi | ASTM C882 |
| Water Absorption (24h) | 0.1 | % | ASTM D570 |
| Heat Deflection Temperature | 135.0 | °F | ASTM D648 |
| Linear Coefficient of Shrinkage | 0.001 | — | ASTM D2566 |
| Compressive Yield (1h) | 4000.0 | psi | ASTM D695 |
| Compressive Yield (4h) | 10500.0 | psi | ASTM D695 |
| Compressive Yield (8h) | 13000.0 | psi | ASTM D695 |
| Compressive Yield (7 Days) | 15500.0 | psi | ASTM D695 |
| Compressive Modulus (7 Days) | 575000.0 | psi | ASTM D695 |
