Albi Clad TF
Albi Clad TF is a water-base intumescent thin film fireproofing material for use wherever interior fireproofing will be exposed to view or be subject to potential damage from external sources. This hard, durable, abrasion resistant product has a smooth, esthetic finish. Albi Clad TF is ideal for application in occupied areas or other locations where solventbase fireproofing materials cannot be used.
Other characteristics
- Brand
- Albi Clad
- Features
Abrasion Resistant, Cost Effective, Durable, Excellent Humidity Resistance, Flame Retardant, Heat Aging Resistant; Factory formulated, single component.; UL listed for 1 through 3-1/2 hours to ASTM E-119.; UL tested for resistance to high humidity, heat aging, CO₂/SO2 industrial atmosphere and washing. Attractive off-white finish.; Water-based.; Thin film application.; 100% Asbestos Free.; Lightweight & hammer-hard.; Will not dust, flake or delaminate.
- Product Type
1K (1 component) Coating, Intumescent Coating, Waterborne Coating; 1K (1 component) Coating; Intumescent Coating; Waterborne Coating
- Application Method
- Spray
- Compatible Substrates & Surfaces
- Metal, Steel
- Markets
- Building & Construction
- Delivery
Albi Clad TF shall be delivered to the jobsite in factory sealed containers.
- Application
Albi Clad TF is spray applied directly from the shipping container. It is important to specify metal primers that are compatible with Albi Clad TF. For application sites subjected to chemical fumes or spills, the use of a topcoat is required. Contact Albi Manufacturing for recommended primers and topcoats. Do not apply Albi Clad TF below 50 degrees F. Care must be taken to protect the material from direct rainfall. Please refer to the Albi Clad TF Fireproofing Application Manual and Field Guide for further details. Thickness of the application will depend upon the fire endurance rating specified. Albi Clad TF must be applied by qualified, factory-trained applicators, utilizing standard, heavy-duty, pneumatic or airless, spray equipment. Installation must be in accordance with manufacturer's printed instructions, and in compliance with specific test requirements. Protect From Freeze.
- Technology
- Ready-to-Use Products
- Certifications
GREENGUARD Gold Certified; Because of its water-base formulation Albi Clad TF is fully compliant with EPA VOC limits and regulations.
- Labeling Claims
- VOC-free
Technical data
Table 1 of 1
10 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Dry Applied Density | 85.0 | PCF | — |
| Hardness | 60 - 65 | Shore D | ASTM D2240 |
| Compressive Strength | 300.0 | psi | ASTM D695 |
| Cohesive/ Adhesion Strength (Cohesive failure)) | 190.0 | psi | ASTM D4541 |
| Abrasion Resistance | 0.3 | gram loss | ASTM D4060 |
| Impact Resistance | 85.0 | inch/lb | ASTM D2794 |
| Weight per Gallon | 11.3 - 11.7 | Ibs/gal | — |
| % Solids by weight | 70 - 74 | % | — |
| Flame Spread (Class A) | 2.0 | — | ASTM E84 |
| Smoke Developed (Class A) | 5.0 | — | ASTM E84 |
