Albi Clad FP
Albi Clad FP is a water-base intumescent thin film fireproofing material for protection to wood, sheetrock and other combustible substrates. This hard, durable, abrasion resistant product has a smooth, esthetic finish. Albi Clad FP is ideal for application in occupied areas or other locations where solvent-base fireproofing materials cannot be used. Because of its water-base formulation Albi Clad FP is fully compliant with EPA VOC limits and regulations.
Product families
- Protective Coatings
Other characteristics
- Brand
- Albi Clad
- Features
Flame Retardant; Factory formulated, single component.; UL listed for 1 through 3-1/2 hours to ASTM E-119.; UL tested for resistance to high humidity, heat aging, CO₂/SO2 industrial atmosphere and washing. Attractive off-white finish.; Water-based.; Thin film application.; 100% Asbestos Free.; Lightweight & hammer-hard.; Will not dust, flake or delaminate.
- Product Type
- Intumescent Coating, Waterborne Coating
- Intumescent Coating
- Waterborne Coating
- Compatible Substrates & Surfaces
- Wood
- Markets
- Building & Construction
- Delivery
Albi Clad FP shall be delivered to the jobsite in factory sealed containers.
- Application
Albi Clad FP is spray applied directly from the shipping container. It is important to specify primers that are compatible with Albi Clad FP. For application sites subjected to chemical fumes or spills, the use of a topcoat is required. Contact Albi Protective Coatings for recommended primers and topcoats. Do not apply Albi Clad FP below 50 degrees F. Care must be taken to protect the material from direct rainfall. Please refer to the Albi Clad FP Fireproofing Application Manual and Field Guide for further details. Thickness of the application will depend upon the fire endurance rating specified. Albi Clad FP must be applied by qualified applicators, utilizing standard airless spray equipment. Installation must be in accordance with manufacturer's printed instructions, and in compliance with specific test requirements.
- Technology
- Ready-to-Use Products
- Certifications
GREENGUARD Gold Certified; Because of its water-base formulation Albi Clad FP is fully compliant with EPA VOC limits and regulations.
- Packaging Type
- Drums
- Pails
Technical data
Table 1 of 1
11 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Dry Applied Density | 85.0 | PCF | — |
| Hardness | 45 - 50 | Shore D | ASTM D2240 |
| Compressive Strength | 300.0 | psi | ASTM D695 |
| Cohesive/ Adhesion Strength (Cohesive failure)) | 190.0 | psi | ASTM D4541 |
| Abrasion Resistance | 0.3 | gram loss | ASTM D4060 |
| Impact Resistance | 85.0 | inch/lb | ASTM D2794 |
| Weight per Gallon | 11.3 - 11.7 | Ibs/gal | — |
| % Solids by weight | 70 - 74 | % | — |
| Flame Spread (Class A) | 2.0 | — | ASTM E84 |
| Smoke Developed (Class A) | 5.0 | — | ASTM E84 |
| Voc | 15.6 | g/l | — |
