Albi Cote TB
Albi Cote TB B is a water-based, single-component, non-flammable, intumescent, interior coating designed to expand in the event of a fire to provide a protective layer of char that could starve fire of oxygen and prevent flame contact with protected surfaces. It is a non-toxic, drain-safe and nonfuming product. Albi Cote TB has low-viscosity for ease of application and can be top coated with latex paint. Consult your Albi representative for details.
Product families
Applications
- Decorative Paints Coatings & Stains
Product Families
- Protective Coatings
Other characteristics
- Brand
- Albi Cote
- Features
Flame Retardant, Good Barrier Properties, Low Viscosity, Non-Toxic
- Product Type
1K (1 component) Coating, Intumescent Coating, Waterborne Coating; 1K (1 component) Coating; Intumescent Coating; Waterborne Coating
- Application Method
- Roller, Spray
- Color
- Off White
- Markets
- Building & Construction
- Storage
Albi Cote TB is available in ready-to-use, factorysealed, standard-sized, five-gallon pails or fifty-fivegallon drums. Other container sizes may be available upon request. DO NOT ALLOW MATERIAL TO FREEZE. Storage at temperatures below acceptable minimum storage temperature may shorten shelf life. Product warranty is void if material is stored below or above recommended storage temperature. DO NOT THIN. Prior to use thoroughly mix Albi Cote TB with an air or electrically driven power mixer for a minimum of 2-4 minutes or until product color and viscosity is uniform. Mixer speed should be set fast enough to uniformly mix the entire container but not so fast as to introduce air into the coating while mixing. For five-gallon pails use a minimum 3" mixing blade, for drums use a minimum 6" mixing blade. Previously opened containers, or containers that have been stored for an extended length of time, may develop a skin on top of or at the edges of the coating, which must be removed prior to mixing.
- PACKAGING
- 5-gal pail or 55-gal drum.
- Shelf LIfe
1 year from date of manufacture if stored 45 - 100 ºF.
- Technology
- Ready-to-Use Products
- Packaging Type
- Drums
- Pails
- Application Methods
- Roller
- Spray
- Benefits and Features
Provides a 15 minute thermal barrier per NFPA 286 Standard; Works with closed-cell and open-cell spray applied foam (SPF); Meets IBC 2603.9 and IRC R316.6 thermal barrier requirements for SPF; Meets IBC 803.1.2.1 and IRC R302.9 requirements for interior surfaces; Meets AC 456, AC 377 and ICC ES ESR-4477; Single coat application over most SPF installation systems; Applied with airless spray, brush or roller; Class III Vapor Retarder @13 mils DFT; Single component-just mix and apply; Fast turnaround time; Cleans up with water; VOC and indoor air quality compliant to CDPH v1.2; No formaldehyde; Water-based, non-toxic, non-fuming, drain safe; Top coat to match any color; One year shelf life
Technical data
Table 1 of 2
17 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Viscosity | 110 - 140 | KU | ASTM D562 |
| Solids % by Volume | 65 - 71 | % | ASTM D2697 |
| Weight Per Gallon | 11.2 - 11.8 | lbs | ASTM D1475 |
| VOC | max. 1 | g/l | Method 24 |
| Toxicity/Solvents | Non-toxic, water-based | — | — |
| Mold & Fungus Resistance (No mold growth) | 10.0 | — | ASTM 3273 |
| Storage Temperature Range (STR) | 45.0 | ˚F | — |
| Tack Free Time (At 77˚F & 50% R.H) | 60 - 90 | minutes | — |
| Dry/Recoat Time (At 77˚F & 50% R.H) | 2 - 3 | hours | — |
| Sag Resistance (On walls) | 34.0 | mils | — |
| Sag Resistance (On celings) | 24.0 | mils | — |
| Processing Pressure (At the gun tip) | min. 2200 | psi | — |
Table 2 of 2
2 rows| Characteristic | Value | Method |
|---|---|---|
| Flame Spread Index | max. 25 | ASTM E-84 |
| Smoke Development | max. 50 | ASTM E-84 |
