Albi Clad 800
Albi Clad 800 is an intumescent mastic coating applied to structural steel, concrete and other construction materials for the purposes of fire protection. Albi Clad 800 carries a wide range of UL listings for interior and exterior uses under both the E-119 and the UL 1709 High Rise Hydrocarbon test criteria.
Other characteristics
- Brand
- Albi Clad
- Features
Abrasion Resistant, Excellent UV Stability, Flame Retardant, Good Weather Stability, High Impact Resistance, Light Weight, Wear Resistant; UL listed for 1 to 3 hours to ASTM E-119 & UL 1709.; Application maintains the contours of the substrate.; Asbestos Free.; Highly resistant to ultraviolet exposure.; UL tested for both interior & exterior exposures.; Lightweight & hammer-hard.; Factory formulated: eliminates job-site mixing.; Accepted by building codes and insurance carriers.; Maintains excellent fire protective properties when exposed to years of extreme abuse and vibration.
- Product Type
1K (1 component) Coating, Intumescent Coating, Waterborne Coating; 1K (1 component) Coating; Intumescent Coating; Waterborne Coating
- Application Area
- Pipes, Tanks
- Pipes
- Tanks
- Application Method
- Spray, Trowel
- Compatible Substrates & Surfaces
- Concrete, Metal, Steel
- Markets
- Building & Construction
- Industrial
- Shelf LIfe
12 months from date of manufacture if stored between 60° and 90°F under normal warehouse conditions.
- Application
Albi Clad 800 is spray applied directly from the shipping container, utilizing standard, heavy-duty, pneumatic spray equipment. Thickness of the application will depend upon the fire endurance rating specified. Albi Clad 800 must be applied by qualified, factory-trained, applicators. Installation must be in accordance with manufacturer's printed instructions, and in compliance with specific test requirements.
- Technology
- Ready-to-Use Products
Technical data
Table 1 of 1
16 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Dry Applied Density | 68.0 | PCF | — |
| Lap Shear (Cohesive failure) | min. 371 | psi | ASTM D1002 |
| Cohesive/Adhesive Strength (Cohesive failure) | min. 375 | psi | ASTM D4541 |
| Compressive Strength | 2100.0 | psi | ASTM D695 |
| Modulus of Elasticity | 94800.0 | psi | ASTM D695 |
| Modulus of Elasticity | 158000.0 | psi | ASTM D790 |
| Flexural Strength | 1420.0 | psi | ASTM D790 |
| Tensile Strength | 756.0 | psi | ASTM D638 |
| Abrasion Resistance | 0.4 | gm.loss1000 cycles | ASTM D1044 |
| Impact Resistance (Of notch) | 0.54 | ft. lbs.in. | ASTM D256 |
| Hardness | 65 - 70 | — | SHORE D |
| Thermal Expansion Coefficient | 1.44 X 10⁻⁵ | in./in./°F | ASTM D696 |
