epsotech PE HA2 NC

Chemical Family: PolyethylenesPolyolefins

Epsotech PE HA2 NC is a single layer product made of high molecular weight Polyethylene. Its low temperature, mechanical strength, and abrasion resistance properties have all significantly improved.

Properties

Physical Form: Sheets

Product families

Applications

Agriculture & Feed — Other Agriculture & Feed Applications; Consumer Goods — Sports & Recreation

Automotive & Transportation — Automotive

Exterior & Body

Industrial — Leather & Textiles

Technical Fabrics

Healthcare & Pharma — Medical

Other Medical Applications

Automotive & Transportation — Transportation

Marine

Other characteristics

Brand: epsotech
Density: 960.0 - 960.0 kg/m³
Features: Acid Resistant, Alcohol Resistant, Alkali Resistant, Excellent Mechanical Strength, Freeze Resistant, Good Abrasion Resistance, High Molecular Weight, Impact Resistance, Low Moisture Absorption, Low Temperature Strength
Polymer Name: High Density Polyethylene (HDPE)
Tensile Modulus: 1000.0 - 1000.0 MPa
Notes: Unless otherwise stated, products are tested at a typical thickness of 4mm * The density quoted should only be used as a guide. This value can change depending upon the type and quantity of pigments or additives used. ** Fire behavior values given by raw material supplier or by indicative test on raw material. Not intended as a specification
Markets: Agriculture & Feed
Automotive & Transportation
Consumer Goods
Healthcare & Pharma
Industrial
Technology: Plastics
Product Families: Plastics — Parts, Shapes & Films
Composites End Use: Profiles
Material Features: Acid Resistant
Alcohol Resistant
Alkali Resistant
Excellent Mechanical Strength
Freeze Resistant
Good Abrasion Resistance
High Molecular Weight
Impact Resistance
Storage and Drying: HDPE has a very low moisture absorption, therefore pre-drying is not normally required
Product Modification: Product code nomenclature takes in to account selected primary features of a product. The suffix may indicate a primary additional functionality, however, further multiple modifications are almost always possible and may be agreed upon and specified prior to our technical and commercial offer. Such enhancements are a normal part of our service capability and they do not affect the general characteristics listed in technical datasheets.
Dimensional Tolerances: Standard tolerances are subject to the local standard tolerance set. Extra tolerance requirements may be possible on request and by special agreement
Supplemental Information: Chemical Contact and cleaning. Chemical resistance is influenced by many factors, including concentration, temperature, exposure time and material stress. Therefore the data should only be used as a guide. Most common mild soaps or detergents dissolved in warm water can be used to effectively clean general dirt and surface contaminants, but in all cases should be objectively tested. Abrasive products will damage the surface.
Plastics and Elastomers End Uses: Door Profiles
Geotextiles
Marine Applications
Wheel Housing Parts

Technical data

Table 1 of 4

4 rows

Characteristic	Value	Unit	Method
Tensile Modulus (23°C, 1mm/min)	min. 1000	MPa	ISO 527
Yield Stress (23°C, 50mm/min)	27.0	MPa	ISO 527
Elongation at Break (23°C, 50mm/min)	min. 450	%	ISO 527
Charpy (Notched, 23°C, 1eA)	NB	KJ/m²	ISO 179

Table 2 of 4

2 rows

Characteristic	Value	Unit	Method
Density*	0.96	g/cm³	ISO 1183
UV Stabilisation (According to Customer Requirement)	Optional	—	—

Table 3 of 4

1 row

Characteristic	Value	Unit	Method
VICAT Softening Point (B/50)	80.0	°C	ISO 306

Table 4 of 4