epsotech PC AS2 E8

The epsotech PC AS2 E8 is a halogen-free PC/ABS with a super-matt surface.

Properties

Physical Form: Sheets

Product families

Automotive & Transportation — Automotive

Interior

Building & Construction — Building Materials

Wall Panels

Other characteristics

Brand: epsotech
Density: 1160.0 - 1160.0 kg/m³
Features: Acid Resistant, Alkali Resistant, Flame Retardant, Freeze Resistant, Matte Finish
Polymer Name: PC/ABS Alloy
Notes: Unless otherwise stated, products are tested at a typical thickness of 4mm * The density quoted should only be used as a guide. This value can change depending upon the type and quantity of pigments or additives used. ** Fire behavior values given by raw material supplier or by indicative test on raw material. Not intended as a specification
Drying: Space must be left between sheets to allow correct drying.
Markets: Automotive & Transportation
Building & Construction
Storage: Long storage times in humid conditions may require a product to be dried, e.g. 80oC for 2 hours +1hr per additional mm of thickness.
Technology: Plastics
Certification: This material is formulated and certified to meet the requirements for ECE R118.02 Annex 6, 7, 8. Certification: E3 118RII-02 6056*00
Labeling Claims: Halogen-free
Product Families: Plastics — Parts, Shapes & Films
Additives Included: Flame Retardant
Composites End Use: Profiles
Material Features: Acid Resistant
Alkali Resistant
Flame Retardant
Freeze Resistant
Matte Finish
Product Modification: Product code nomenclature takes in to account selected primary features of a product. The suffix may indicate a primary additional functionality, however, further multiple modifications are almost always possible and may be agreed upon and specified prior to our technical and commercial offer. Such enhancements are a normal part of our service capability and they do not affect the general characteristics listed in technical datasheets.
Dimensional Tolerances: Standard tolerances are subject to the local standard tolerance set. Extra tolerance requirements may be possible on request and by special agreement.
Supplemental Information: Chemical Contact and cleaning. Chemical resistance is influenced by many factors, including concentration, temperature, exposure time and material stress. Therefore the data should only be used as a guide. Most common mild soaps dissolved in warm water can be used to effectively clean general dirt and surface contaminants, but in all cases should be objectively tested. Abrasive products will damage the surface.
Certifications and Compliance: UN-ECE R.118.03
Plastics and Elastomers End Uses: Automotive Interior Parts
Door Profiles
Wall Panels

Technical data

Table 1 of 4

4 rows

Characteristic	Value	Unit	Method
Tensile Modulus (23°C)	2000.0	MPa	ISO 527
Yield Stress (23°C)	47.0	MPa	ISO 527
Charpy (Notched, 23°C, 1eA)	45.0	KJ/m²	ISO 179
Charpy (Notched, -30°C, 1eA)	20.0	KJ/m²	ISO 179

Table 2 of 4

3 rows

Characteristic	Value	Unit	Method
Density*	1.16	g/cm³	ISO 1183
UV Stabilisation (According to Customer Requirement)	Optional	—	—
Flammability Rating (Annex 6, 7, 8 Cert:: E3 118RII-02 6056*00)	min. 1.5	mm	ECE R118.02

Table 3 of 4

2 rows

Characteristic	Value	Unit	Method
VICAT Softening Point (B/50)	113.0	°C	ISO 306
HDT-A (A 1.8MPa)	98.0	°C	ISO 75

Table 4 of 4