Nutech Paint Metal Primer
- Chemical Family
- Acrylics & Acrylates
Nutech Paint Metal Primer is a water based, corrosion-resistant acrylic primer which exhibits exceptional adhesion and protection properties. It is used in conjunction with Flexishield and NXT top coats, the finishing system performs exceptionally well under all weather conditions to a range of metal surfaces.
Product families
- Waterproofing & Weatherproofing
Other characteristics
- Features
Chemical Resistant, Corrosion Resistant, Good Adhesion, Good Weather Stability, High Hardness, Improved Flexibility, Long Term Protection, Oil Resistant, Water-based; Excellent long-term resistance to corrosion and rust.; Excellent adhesion to a wide range of metal and pre coated metal substrates.; Also suitable for new and weathered galvanized sheeting.; Improved hardness and flexibility.; Nutech Metal Primer is an acrylic coating, which demonstrates exceptional adhesion to a range of substrates including, all metal roofing surfaces, new/older galvanized metal, masonry surfaces, over colourbond and other coated metal sheet roofing products.; The coating provides good chemical resistance, weather ability. It is suitable for application by brush, roller, or airless spray.; Surfaces primed with Nutech Metal Primer perform exceptionally under conditions of hot, cold, and wet weather, provided they are correctly cleaned and top coated with a suitable protective finish.
- Product Type
- Coating, Primer, Waterborne Coating
- Application Area
- Roofing Substrates
- Application Method
- Brush, Roller, Spray
- Compatible Substrates & Surfaces
Aluminum, Coated Surfaces, Concrete, Galvanized Steel, Metal, Steel
- Color
- White
- Recoat
- 2 Hours
- Carrier
- Water
- Markets
- Building & Construction
- Storage
Cool, dry location. Avoid contact with direct sunlight and heat.
- Benefits
Improved hardness and flexibility; Excellent long term resistance to corrosion and rust; Easy application and clean up; Suitable for new and weathered galvanized and zinc metal sheeting; Weatherproof; Excellent adhesion to a wide range of metal and masonry substrates; Outstanding durability; Oil and water-resistant
- Clean Up
Protecting our environment is important to Nutech Paints. Clean up with clean fresh water.; Do not pour leftover paint down the drain.; Unwanted paint should be kept in a sealed container and then disposed of via special waste collection services.; Empty paint containers should be left open in a well-ventilated area to dry out.; Dispose of empty paint containers in accordance with local authority's guidelines. Always check with your local council first.
- First Aid
In case of eye contact, flush thoroughly with water for at least 15 minutes.; In case of skin contact, wash affected areas with soap and water.; Remove and wash contaminated clothing.; If inhalation causes physical discomfort, remove to fresh air.; If discomfort persists, any breathing difficulty occurs or if swallowed, seek medical advice.
- PACKAGING
- 15L, 200L, 1000L
- Touch Dry
- 30 Minutes
- Shelf LIfe
- Stored 24 months at 25°C.
- Soluble In
- Water
- Test Patch
Conduct a small test patch in an inconspicuous area to ensure adequate product performance and adhesion.
- Drying Time
Ideal ambient conditions 25°C at 60% relative humidity. In cooler temperatures or high humidity, dry times will be extended.
Technical data
Table 1 of 1
6 rows| Characteristic | Value | Unit |
|---|---|---|
| pH | 8.5 - 9.0 | — |
| Total VOC | max. 5 | g/l |
| Film Forming Temperature | min. 10 | °C |
| Dry Film Thickness | min. 70 | μm |
| Volume Solids | 35.0 | % |
| Specific Gravity | 1.26 | — |
