Nutech Paint NuPrime

Other characteristics

Features

Bacteria Resistant, Cleanable, Consistent High Quality, Cost Effective, Excellent Intercoat Adhesion, Fast Drying, Flexible, Good Non-Yellowing Properties, Good Weather Stability, High Capacity of Penetration, High Durability, High Strength, Mildew Resistant, UV Resistant, Water Resistant, Water-based; Stable non-yellowing coating; Retains both flexibility and strength; Provides excellent protection against bacteria and mold; Easy clean up with water; NuPrime is a high-quality compound adhesive that bonds with difficult to penetrate powdery surfaces.; Concrete and masonry surfaces undercoated with NuPrime require substantially less topcoat product compared to an unsealed surface.; NuPrime remains one of the only products recommended for the preparation of powdery oxidized surfaces.; Surfaces undercoated with NuPrime and top coated with either Tileflex, Nuflex or Colourfast perform exceptionally after curing under all weather conditions to provide a 100% waterproof coating.; NuPrime has undergone rigorous testing and special consideration has been given to ensure the chemical composition and compatibility are suitable for all Australian, New Zealand, South-East Asian, and UK conditions.; NuPrime is a stable non-yellowing coating which retains both flexibility and strength whilst also providing superb protection against bacteria and mold on most surfaces

Show in full

Product Type

Coating, Primer, Waterborne Coating

Application Area

Roofing Substrates

Application Method

Brush, Roller, Spray

Compatible Substrates & Surfaces

Concrete

Usage

Used as an undercoat on powdery surfaces.

Color

White

Recoat

1 hour at cooler temperatures or higher humidity drying times will be extended.

Carrier

Water

Markets

Building & Construction

Storage

Cool, dry location. Avoid contact with direct sunlight and heat.

Benefits

Improved drying speed.; Guaranteed inter-coat adhesion.; High resistance to mold and fungus.; 100% water and weatherproof performance.; Easy application by brush, roller or spray unit.; Ultraviolet radiation resistant when overcoated.; Economical primer coat.; Excellent penetration through oxidized powdery tile surfaces.

Show in full

Clean Up

Protecting our environment is important to Nutech Paints. Clean up with cold water away from drains.; Do not pour leftover paint down the drain.; Unwanted paint should be kept in a sealed container and then disposed of via special waste collection services.; Empty paint containers should be left open in a well-ventilated area to dry out.; Dispose of empty paint containers in accordance with local authority's guidelines; Always check with your local council first.

Show in full

Coverage

4m2/L (per coat)

First Aid

In case of eye contact, flush thoroughly with water for at least 15 minutes.; In case of skin contact, wash affected areas with soap and water.; Remove and wash contaminated clothing.; If inhalation causes physical discomfort, remove to fresh air.; If discomfort persists, any breathing difficulty occurs or if swallowed, seek medical advice.; If discomfort persists, or any breathing difficulty occurs or if swallowed seek medical advice.

Show in full

PACKAGING

4L, 10L, 20L

Touch Dry

30 Minutes

Provisions

Only apply between 10°C and 30°C ambient air temperatures.; Ensure no surface moisture is present prior to application.; Consideration must be given to other climatic conditions such as wind and relative humidity; Failure to observe these provisions may affect coating adhesion; Avoid mist-spraying Nu-Prime on hot tiles to prevent flash surface drying.

Show in full

Shelf LIfe

Stored 24 months at 25°C.

Soluble In

Water

Test Patch

Conduct a small test patch in an inconspicuous area to ensure adequate product performance, substrate porosity and provide an indication of the amount of product required to complete the project.

Drying Time

Ambient conditions at 25°C and 50% relative humidity.