Nutech Paint GP Primer

Other characteristics

Features

Excellent Intercoat Adhesion, Fast Drying, Fungus Resistant, General Purpose, Good Bonding Strength, Good Smoothness, High Durability, High Solids Content, Medium Gloss, Mildew Resistant, Non-Toxic, Resistance to UV lights, Water Resistant, Water-based; It is a Low Sheen water-based coating with excellent durability and adhesion performance.; Surfaces primed with GP Primer and top coated with a 100% Acrylic systems perform exceptionally providing years of maintenance-free service.; This product is non-toxic, non-flammable and faster drying year-round making applications safer and easier.; On smooth surfaces, the additional coverage of a topcoat is increased improving economy.; GP Primer has been developed following years of research and development to formulate an undercoat, which will adhere to a range of roofing surfaces and enhance the appearance of topcoat systems.; GP Primer has been developed for Australian and South-East Asian environmental conditions. It provides excellent protection against biological growth including moss, lichen, mold and fungus.; High solids to maximize filling characteristics; Promotes excellent inter-coat adhesion; Waterproof; Fast drying

Show in full

Product Type

Coating, Primer, Solventless & High Solids Coating, Waterborne Coating

Application Area

Roofing Substrates

Application Method

Brush, Roller, Spray

Compatible Substrates & Surfaces

Coated Surfaces, Concrete

Color

White

Recoat

2 Hours

Carrier

Water

Storage

Cool, dry location. Avoid contact with direct sunlight and heat.

Benefits

Guaranteed surface and intercoat adhesion; High solids for maximum film build and filler characteristics; High degree of mold, fungus and lichen resistance; Waterproof; Faster drying time than conventional primer systems; Easy application by brush, roller or airless spraying; Ultraviolet light-resistant

Clean Up

Protecting our environment is important to Nutech Paints. Clean up hands and equipment with fresh warm water or dispose of equipment.; Do not pour left over paint down drains or in rubbish bins.; Unwanted paint should be kept in a sealed container and then disposed of via special waste collection services.; Empty paint containers should be left open in a well ventilated area to dry out.; Dispose of empty paint containers in accordance with local authority guidelines.; Always check with your local council first.

Show in full

Coverage

Smooth Surface - 6m2/L per coat; Rough Surface - 4m2/L per coat; Note - Coverage will depend on the porosity and roughness of the surface.; To maximize performance do not over spread.

First Aid

In case of eye contact, flush thoroughly with water for at least 15 minutes.; In case of skin contact, wash affected areas with soap and water.; Remove and wash contaminated clothing.; If inhalation causes physical discomfort, remove to fresh air.; If discomfort or symptoms persist, seek medical advice.

PACKAGING

15L

Touch Dry

30 Minutes

Provisions

Always disconnect water tanks before cleaning and coating. Thoroughly flush gutters and allow several good rains to remove all overspray before reconnecting tanks.

Shelf LIfe

Stored 24 months at 25°C.

Soluble In

Water

Substrates

Smooth, glossy and rough cement roof tiles, porous concrete and cinder block walls, lightweight concrete panels, tilt slab concrete walls, concrete render stucco and stucco-type wall finishes.

Test Patch

Conduct a small test patch in an inconspicuous area to ensure adequate product performance, substrate porosity and provide an indication of the amount of product required to complete the project.

Drying Time

Ideal ambient conditions 25°C at 60% relative humidity. In cooler temperatures or high humidity, dry times will be extended.

Preparation

All surfaces must be clean from moss and lichen.; Refer to Nutech Hypo OR Nutech MossRid.; High pressure clean using a minimum of 3000psi; Allow surface to dry thoroughly; Improperly prepared surfaces may result in coating failure