SpecSeal® Smoke ‘N’ Sound Spray
Other characteristics
- Brand
- SpecSeal
- Note
*Tested to ASTM E84 (UL723) at 14% surface coverage (modified test for sealants and caulks); **Per SCAQMD Rule 1168 (EPA Method 24)
- Features
Economical - high performance without the high price; Water resistant - will not re-emulsify when dry; Water-based - easy installation, cleanup, and disposal; Thixotropic - offers high build application; Acoustically tested - reduces noise transmission; UL® GreenGuard Gold Certified
- Properties
- Autobonding
- Low VOC
- Paintable
- Smoke Barrier
- Spray
- STC Rating
- Water Based
- Shelf LIfe
- 24 months
- Limitations
Use product as per manufacturer's instructions. Use only in applications per the manufacturer's published designs or specific recommendations. End user must ultimately determine the suitability of the product and/or design to his or her specific requirements and assumes responsibility for its use. Product Contains Water and Is Conductive Until Dry. Do Not Apply in the Presence of Exposed or Energized Electrical Conductors.This product has been designed to be safe with plastics. It has been used extensively and successfully with various types of plastic pipes, tubes, and plastic cable insulations. Variations in these materials, however, make it impossible to guarantee compatibility. STI strongly recommends that the user consults with the pipe, tubing, or cable manufacturer in question regarding any known sensitivities or potential restrictions before applying this product.
- Maintenance
Inspection : Installations should be inspected periodically for subsequent damage. Following safety precautions listed below and pertinent installation guidelines, remove coating in damaged areas down to undamaged material. Reapply fresh coating material to original coating thickness.
- Performance
SpecSeal® Smoke 'N' Sound Spray has superb color stability and resistance to ultraviolet rays, ozone, and airborne contaminants. It is also mildew resistant and meets Class A finish requirements for Flame Spread and Smoke Development when tested in accordance with ASTM E84. SpecSeal® Smoke 'N' Sound Spray when applied to a wet film thickness of 1/8" (3.2 mm to 1/4" (6mm) over appropriate backing materials, provides less than one cfm air leakage when tested in accordance with UL2079 or UL1479 and is also acoustically tested, demonstrating excellent sound attenuation properties.
- Availability
- 55.48 lbs (25.17 kg)
- Test Standards
- ASTM E90, C919
Technical data
Table 1 of 1
17 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Weight | 1.28 | kg/L per Gallon | — |
| Solids Content (by Weight) | 73.5 | % | — |
| Solids Content (by Volume) | 66.2 | % | — |
| Flame Spread* | 5.0 | — | — |
| Smoke Development* | 0.0 | — | — |
| Mold & Fungus Growth Rating | 0.0 | — | ASTM G21 |
| Movement Capabilities | 0 - 16 | % | — |
| Coverage (1/8”) | 12.8 | sq ft/gallon | — |
| Viscocity | 150,000 to 200,000 | cps | — |
| pH | 7 to 8 | — | — |
| Solvent Content | N/A | — | — |
| In Service Temperature | max. 185 (85) | °F(°C) | — |
