SpecSeal® Safing Spray
Other characteristics
- Brand
- SpecSeal
- Features
High Solids Content, Non-Halogenated, Rapid Drying Properties, Water Resistant; Bridges gaps and irregularities in mineral wool safing; Tough polymer designed to resist damage from construction debris; Tested for up to 4 Hour fire resistance when tested to ASTM E2307; Listed in over 100 UL Tested Curtain wall Systems; UL® GreenGuard Gold Certified
- Product Type
- Elastomeric Coating
- Application Area
- Pipes, Tubes
- Pipes
- Tubes
- Application Method
- Brush, Roller, Spray
- Compatible Substrates & Surfaces
- Plastics
- Note
*Tested to ASTM E84 (UL723) at 14% surface coverage (modified test for sealants and caulks); **Per SCAQMD Rule 1168 (EPA Method 24); ***500 Cycles per UL2079, ASTM E1399, and ASTM E1966; ADependent on temperature and humidity
- Markets
- Building & Construction
- Electrical & Electronics
- Properties
- Paintable
- Smoke Barrier
- Spray
- STC Rating
- Water Based
- Shelf LIfe
- 18 months
- Limitations
Use product as per manufacturer's instructions. Use only in applications per the manufacturer's published designs or specific recommendations. End user must ultimately determine the suitability of the product and/or design to his or her specific requirements and assumes responsibility for its use. Product Contains Water and Is Conductive Until Dry. Do Not Apply in the Presence of Exposed or Energized Electrical Conductors.This product has been designed to be safe with plastics. It has been used extensively and successfully with various types of plastic pipes, tubes, and plastic cable insulations. Variations in these materials, however, make it impossible to guarantee compatibility. STI strongly recommends that the user consults with the pipe, tubing, or cable manufacturer in question regarding any known sensitivities or potential restrictions before applying this product.
- Maintenance
Inspection : Installations should be inspected periodically for subsequent damage and repaired accordingly. If the packing or forming material is damaged, it should be removed and replaced maintaining the required compression. Reapply fresh coating to the original specified wet thickness.
- Availability
- 56.00 lbs (25.40 kg)
- Technology
- Ready-to-Use Products
- Test Standards
- ASTM E2307
- ASTM E119 (ANSI/UL263)
- CAN/ULC-S101
- CAN/ULC-S115
Technical data
Table 1 of 1
19 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Weight | 1.29 | kg/L per Gallon | — |
| Solids Content (by Weight) | 77.0 | % | — |
| Solids Content (by Volume) | 70.1 | % | — |
| Flame Spread* | 0.0 | — | — |
| Smoke Development* | 0.0 | — | — |
| Mold & Fungus Growth Rating | 0.0 | — | ASTM G21 |
| Movement Capabilities*** | 0 - 25 | % | ASTM C719 |
| Coverage (1/8”) | 12.8 | sq ft/gallon | — |
| Viscocity | 130000.0 | cps | — |
| pH | 7.8 | — | — |
| Solvent Content | None | — | — |
| Plasticizer | None | — | — |
