SpecSeal® ES
Product families
- Caulks & Sealants
Other characteristics
- Brand
- SpecSeal
- Product Type
- Elastomeric Sealant, Waterborne Sealant
- Elastomeric Sealant
- Waterborne Sealant
- Application Area
- Pipes, Tubes
- Pipes
- Tubes
- Application Method
- Trowel
- Compatible Substrates & Surfaces
- Plastics
- Note
*Tested to ASTM E84 (UL723) at 14% surface coverage (modified test for sealants and caulks); **Per SCAQMD Rule 1168 (EPA Method 24); ***500 Cycles per UL2079, AC30 (ICBO) and ASTM E1399 ADependent on temperature and humidity
- Markets
- Building & Construction
- Electrical & Electronics
- Features
Highly elastomeric gun grade sealant; Tested for up to 4 Hour fire resistance rating when tested to ASTM E1966/UL 2079.; Can be sanded and painted to match its surroundings; Listed in over 45 UL Tested Construction Joint Systems; UL® GreenGuard Gold Certified
- Properties
- Autobonding
- Flexible
- Joint Movement
- Low VOC
- Paintable
- Smoke Barrier
- STC Rating
- Water Based
- Shelf LIfe
- 24 months
- Limitations
Use product as per manufacturer's instructions. Use only in applications per the manufacturer's published designs or specific recommendations. End user must ultimately determine the suitability of the product and/or design to his or her specific requirements and assumes responsibility for its use. Product Contains Water and Is Conductive Until Dry. Do Not Apply in the Presence of Exposed or Energized Electrical Conductors. This product has been designed to be safe with plastics. It has been used extensively and successfully with various types of plastic pipes, tubes, and plastic cable insulations. Variations in these materials, however, make it impossible to guarantee compatibility. STI strongly recommends that the user consults with the pipe, tubing, or cable manufacturer in question regarding any known sensitivities or potential restrictions before applying this product.
- Performance
When applied to a wet film thickness of 1/4 in (6.3 mm) to 1/2 in (12.5 mm) over appropriate backing materials, SpecSeal® ES Elastomeric Sealant has been successfully tested in one, two, three and four hour joints when tested in accordance with UL2079 (ASTM E1966) and CAN/ULC S115. All tested systems have been cycled 500 times at total movement up to +/- 25%.
- Technology
- Ready-to-Use Products
- Test Standards
- UL2079 (ASTM E1966)
- CAN/ULC S115
Technical data
Table 1 of 1
16 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Weight | 1.45 | kg/L per Gallon | — |
| Solids Content (by Weight) | 80.7 | % | — |
| Solids Content (by Volume) | 73.0 | % | — |
| Flame Spread* | 5.0 | — | — |
| Smoke Development* | 5.0 | — | — |
| Mold & Fungus Growth Rating | 0.0 | — | ASTM G21 |
| pH | 7.5 | — | — |
| Movement Capabilities*** | 0 - 50 | % | — |
| Solvent Content | None | — | — |
| In Service Temperature | max. 185 (85) | °F(°C) | — |
| Drying Timeᴬ (Tack Free) | 2.0 | hours | — |
| Drying Timeᴬ (Dry Through) | 5 to 7 | days | — |
