SpecSeal® AS200
Other characteristics
- Brand
- SpecSeal
- Features
Flame Retardant, Flexible, Moisture Resistant, Non-Halogenated, Thixotropic, Water Resistant; Applied with airless spray equipment; Highly flexible to accommodate for dynamic joint conditions; Tested for up to 4 Hour fire resistance rating when tested to ASTM E1966/UL 2079; Listed in over 100 UL Tested Curtain Wall Systems; UL® GreenGuard Gold Certified
- Product Type
Elastomeric Coating, Solventless & High Solids Coating, Waterborne Coating; Elastomeric Coating; Solventless & High Solids Coating; Waterborne Coating
- Application Area
- Pipes, Tubes
- Application Method
- Brush, Spray, Trowel
- Compatible Substrates & Surfaces
- Plastics
- Note
*Tested to ASTM E84 (UL723) at 14% surface coverage (modified test for sealants and caulks); **Per SCAQMD Rule 1168 (EPA Method 24); ***500 Cycles per UL2079, AC30 (ICBO) and ASTM E1399; ADependent on temperature and humidity
- Markets
- Building & Construction
- Electrical & Electronics
- Paints & Coatings
- Properties
- Autobonding
- Flexible
- Joint Movement
- Low VOC
- Paintable
- Smoke Barrier
- Spray
- STC Rating
- Shelf LIfe
- 24 months
- Limitations
Use product as per manufacturer's instructions. Use only in applications per the manufacturer's published designs or specific recommendations. End user must ultimately determine the suitability of the product and/or design to his or her specific requirements and assumes responsibility for its use. Product Contains Water and Is Conductive Until Dry. Do Not Apply in the Presence of Exposed or Energized Electrical Conductors. This product has been designed to be safe with plastics. It has been used extensively and successfully with various types of plastic pipes, tubes, and plastic cable insulations. Variations in these materials, however, make it impossible to guarantee compatibility. STI strongly recommends that the user consults with the pipe, tubing, or cable manufacturer in question regarding any known sensitivities or potential restrictions before applying this product.
- Performance
SpecSeal® AS200 Elastomeric Spray in conjunction with appropriate backing materials has been tested in one, two, three and four hour joints tested in accordance with ASTM E1966 (ANSI/UL2079), ASTM E814 (ANSI/UL1479) and CAN/ULC S115. This product has also been tested for use in Perimeter Fire Barrier Systems in accordance with ASTM E2307. Consult factory for individual system designs and application requirements.
- Technology
- Ready-to-Use Products
Technical data
Table 1 of 1
17 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Weight | 1.28 | kg/L per Gallon | — |
| Solids Content (by Weight) | 74.0 | % | — |
| Solids Content (by Volume) | 66.5 | % | — |
| Flame Spread* | 10.0 | — | — |
| Smoke Development* | 0.0 | — | — |
| Mold & Fungus Growth Rating | 0.0 | — | ASTM G21 |
| Movement Capabilities*** | 0 - 100 | % | — |
| Coverage (1/8 in Wet Thickness) | 12.8 | sq ft/gallon | — |
| Viscocity | 130000.0 | cps | — |
| pH | 7.5 | — | — |
| Plasticizer free | None | — | — |
| In Service Temperature | max. 185 (85) | °F(°C) | — |
