STIRRI RA
- Chemical Family
- Rosins
STIRRI RA™ is a versatile no-clean solder paste and tacky flux characterized by excellent printability and compatibility, making it suitable for stencil applications and defense-related tasks. It belongs to the rosin chemical family, ensuring reliability and adherence to industry standards for soldering needs.
Product families
- Other Military & Defense Applications
- Aerospace & Aviation
Other characteristics
- Brand
- STIRRI
- Features
- Excellent Compatibility, Excellent Printability
- Product Type
- Solder Paste
- Application Area
- Defense, Stencil
- Defense
- Stencil
- Markets
- Automotive & Transportation
- Industrial
- Keynotes
Rosin-based medium activity - ROM0; World-class printability, instant activity response; Optimal tack/viscosity Defense/Aerospace grade; Superior dispensing flow, stellar stencil printing, excellent pin transfer; Sharp definition at high-speeds; Low solder balling and graping; Long stencil life; Low voiding, excellent compatibility; Easy to clean using IPA, solvents, water-based saponifiers, vapor degreaser or ultrasonic devices
- Printing
Optimal print definition for fine pitch applications. Long stencil life of this product virtually eliminates waste of solder paste. For mesh/size determination refer to the Pitch Requirements chart below:
- Viscosity
- * Malcom @ 10 RPM @ 25°C x10³ g/cm/s
- Availability
STIRRI-RA™ available in many alloys including high reliability solder: Sn42Bi58, Sn42Bi57.6Ag0.4, Sn42Bi57Ag1, Sn43Pb43Bi14, Sn60Pb40, Sn62Pb36Ag2, Sn62.8Pb36.8Ag0.4, Sn63Pb37
- Technology
- Ready-to-Use Products
- Packaging Type
- Cartridges
- Jars
- Syringe
- Product Families
Ready-to-Use Products — Other Ready-to-Use Products
- Printer Operations
Stencil printer does not require any specific optimization, should be fully adjustable based on standard in-house process requirements, including high-speed printers; Print Speed: 20-200 mm/sec (add pressure for speed) Squeegee Pressure: 70-540 g/cm of blade (add for speed) Stencil Vac/Wipe: Every 10-25 prints or as necessary; Automated and vacuum cleaning systems for both stencil and misprinted boards. Manual cleaning using Isopropyl alcohol (IPA), co-solvents and/or ultrasonic scrubbers, vapor degreaser.
- Packaging Information
- Options with various viscosity and metal load for stencil printing and dispensing applications:
- Printing
- Jars, 1/4 NPT nozzle cartridges
- Dispensing
- Syringes, ProFlow cassettes
- Ready to Use Product Features
- Excellent Compatibility
- Excellent Printability
- Shelf LIfe
Refrigerated storage at 5-7°C will prolong the solder paste shelf life to no less than 6 months. Solder Paste should be allowed to reach ambient temperature, normalize for about 6-8 hours before use. Tacky flux has 24 months shelf life stored in room temperature. Refrigeration won't extend shelf life. Normalize for 4-6 hours if stored refrigerated. Paste/flux in syringes and cartridges should be kept vertically, dispensing tip pointing down.. Note :NEVER FREEZE SOLDER PASTE / FLUX!
Technical data
Table 1 of 1
1 row| Characteristic | Value | Unit |
|---|---|---|
| Stencil Life (at 30 - 70% R/H & 20 - 25°C) | max. 12 | hours |
