To catalogue
TECACOMP PP ID grey 4242
- Chemical Family
- PolyolefinsPolypropylenes (PP)
TECACOMP PP ID gray 4242 is a Polypropylene Compound (PP Compound) polymer. It can be processed using injection molding.
Properties
- Physical Form
- Granules
- Solid
Product families
Applications
Applications
- Consumer Goods — Housewares
Electrical & Electronics — Packaging & Assembly
- Other Packaging & Assembly Applications
Food & Nutrition — Processing & Packaging
- Food & Beverage Manufacturing
Product Families
Plastics — Basic Thermoplastics
- Polyolefins
Other characteristics
- Brand
- TECACOMP
- Polymer Name
- Polypropylene Compound (PP Compound)
- Melt Flow Index
- 10.0 - 10.0 g/10 min
- Fillers Included
- Other Filler
- Processing Methods
- Injection Molding
- Color
- Grey
- Markets
- Consumer Goods
- Electrical & Electronics
- Food & Nutrition
- Predrying
To achieve optimum mechanical properties, it is recommended to pre-dry the material w ith the above mentioned parameters.
- Technology
- Plastics
- Material Features
- Metal Detectable
- Processing Information
This material can be processed as a thermoplastic taking the normal technical provisions into account. The above mentioned information refers exclusively to the injection molding process.. Back pressure and injection rate should be adjusted to the component geometry accordingly. The optimum processing temperature depends upon the respective geometry of the molded part and can be different from machine to machine.
- Certifications and Compliance
- FDA Compliant
- Regulation (EU) No. 10/2011 (PIM)
- Plastics and Elastomers End Uses
- Cable Ties
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 4
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Charpy Impact Strength | 52 | kJ/m2 | DIN EN ISO 179-1eU |
| Elongation at Break (50 mm/min) | 35 | % | DIN EN ISO 527-1 |
| Modulus of Elasticity (Tensile test, 50 mm/min) | 1550 | MPa | DIN EN ISO 527-1 |
| Tensile Strength (50 mm/min) | 29 | MPa | DIN EN ISO 527-1 |
Table 2 of 4
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Glass Transition Temperature | 13 | °C | — |
| Melting Temperature | 165 | °C | DIN 53765 |
| Service Temperature (long term) | 100 | °C | — |
| Service Temperature (short term) | 130 | °C | — |
Table 3 of 4
1 row| Characteristic | Value | Unit |
|---|---|---|
| Density | 1.06 | g/cm3 |
Table 4 of 4
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Detectability | 4 | mm Al | — |
| Melt Flow Index (230°C / 2.16 kg) | 10 | g/10 min | DIN EN ISO 1133 |
