TECACOMP PEEK TRM PVX SIC grey 1047410
- Chemical Family
- Polyether Ether Ketone (PEEK)
TECACOMP PEEK TRM PVX SIC gray 1047410 is a Polyetheretherketone (PEEK) polymer that can be processed by injection molding.
Properties
- Physical Form
- Granules
- Solid
Product families
Applications
- Chassis & Brake
- Exterior & Body
- Other Industrial Applications
Product Families
- High Performance Thermoplastics
Other characteristics
- Brand
- TECACOMP
- Polymer Name
- Polyetheretherketone (PEEK)
- Processing Methods
- Injection Molding
- Color
- Grey
- Markets
- Automotive & Transportation
- Industrial
- Predrying
To achieve optimum mechanical properties, it is recommended to pre-dry the material w ith the above mentioned parameters.
- Technology
- Plastics
- Material Features
- Tribological Modified
- Processing Information
This material can be processed as a thermoplastic taking the normal technical provisions into account. The above mentioned information refers exclusively to the injection molding process.. Processing should be carried out as gently as possible, in order to maintain the maximum fiber length in the component. Back pressure and injection rate should be adjusted to the component geometry accordingly. The optimum processing temperature depends upon the respective geometry of the molded part and can be different from machine to machine.
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 4
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Charpy Impact Strength | 23.6 | kJ/m2 | DIN EN ISO 179-1eU |
| Compression Modulus | 5810 | MPa | EN ISO 604 |
| Compression Strength (1 %) | 65.9 | MPa | EN ISO 604 |
| Elongation at Break | 2.2 | % | DIN EN ISO 527-1 |
| Modulus of Elasticity (Tensile test) | 10.261 | MPa | DIN EN ISO 527-1 |
| Tensile Strength | 111 | MPa | DIN EN ISO 527-1 |
Table 2 of 4
1 row| Characteristic | Value | Unit |
|---|---|---|
| Density | 1 | g/cm3 |
Table 3 of 4
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Glass Transition Temperature | 143 | °C | — |
| Melting Temperature | 343 | °C | — |
| Service Temperature (long term) | 260 | °C | — |
| Service Temperature (short term) | 300 | °C | — |
| Thermal Expansion (CLTE) Longitudinal (at 180 – 285°C) | 38 | 10^-6 K^-1 | DIN EN ISO 11359-1;2 |
| Thermal Expansion (CLTE) Longitudinal (at 23 – 140°C) | 19 | 10^-6 K^-1 | DIN EN ISO 11359-1;2 |
Table 4 of 4
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Bulk Density | 0.57 | g/cm3 | EN ISO 60 |
| Melt Flow Index (380°C / 5kg) | 17.8 | g/10 min | DIN EN ISO 1133 |
| Molding Shrinkage (in-plane) | 0.39 | % | DIN EN ISO 294-4 |
| Molding Shrinkage (through-plane) | 1.23 | % | DIN EN ISO 294-4 |
| Water Absorption (23°C / 50% relative humidity up to saturation) | max. 0.1 | % | DIN EN ISO 62 |
