To catalogue
Akulon® HR-HG7
- Chemical Family
- Polyamides
Akulon® HR-HG7 is a polyamide 6 (PA 6) resin commonly used in the automotive and transportation industry, particularly in applications related to cooling and climate systems, exterior components, and interior parts. It offers features such as heat stabilization, hydrolysis resistance, and lightweight properties.
Product families
Automotive & Transportation — Automotive
- Cooling & Climate
- Exterior & Body
- Interior
Other characteristics
- Brand
- Akulon®
- Polymer Name
- Polyamide 66 (PA 66)
- Fillers Included
- Glass Fiber
- Additives Included
- Heat Stabilizer
- Processing Methods
- Injection Molding, Injection Molding
- Reinforcement Material
- Glass Fibers
- Safety
For the safety properties of the material, we refer to our SDS which can be ordered at our sales offices. During practical operation we advise to wear personal safety protections for hand/eye/body.
- Markets
- Automotive & Transportation
- PACKAGING
Akulon® grades are supplied in airtight, moisture- proof packaging.
- Technology
- Composite Materials
- Plastics
- OEM Standards
- PSA
- Renault
- Packaging Type
- Bags
- Boxes
- Silos
- Super Sacks
- Material Features
- Heat Stabilized
- Hydrolysis Resistant
- Light Weight
- OEM Specifications
- PSA Peugeot-Citroen FTM 64 0111
- RENAULT PMR
- Reinforcement Form
- Tape
- Unidirectional Fabric
- Certifications and Compliance
- ISO 14001
- OHSAS
- REACH (Europe)
- Composite Materials Functions
- Resins Binders & Matrix Materials
- Composites Processing Methods
- Injection Molding
- Plastics and Elastomers End Uses
- Air Intake Manifolds
- Door Panel
- Flooring
- Radiator End Caps
- Wheel Housing Parts
- Plastics and Elastomers Functions
- Resin
Technical data
Table 1 of 6
15 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Modulus | 11500 / 7550 | MPa | ISO 527-1/-2 |
| Tensile Modulus (120°C) | 5350 / - | MPa | ISO 527-1/-2 |
| Tensile Modulus (140°C) | 5000 / * | MPa | ISO 527-1/-2 |
| Stress at Break | 210 / 140 | MPa | ISO 527-1/-2 |
| Stress at Break (120°C) | 109 / - | MPa | ISO 527-1/-2 |
| Stress at Break (140°C) | 101 / * | MPa | ISO 527-1/-2 |
| Strain at Break | 3.5 / 5.8 | % | ISO 527-1/-2 |
| Strain at Break (at 120°C) | 7.4 / - | % | ISO 527-1/-2 |
| Strain at Break (at 140°C) | 7.5 / * | % | ISO 527-1/-2 |
| Flexural Modulus | 9400 / - | MPa | ISO 178 |
| Flexural Strength | 270 / - | MPa | ISO 178 |
| Charpy Impact Strength (at +23°C) | 89 / 95 | kJ/m² | ISO 179/1eU |
Table 2 of 6
11 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melting Temperature (10°C/min) | 260 / * | °C | ISO 11357-1/-3 |
| Temperature of Deflection Under Load (1.80 MPa) | 247 / * | °C | ISO 75-1/-2 |
| Temperature of Deflection Under Load (0.45 MPa) | 260 / * | °C | ISO 75-1/-2 |
| Coefficient of Linear Thermal Expansion (parallel) | 0.2 / * | E-4/°C | ISO 11359-1/-2 |
| Coefficient of Linear Thermal Expansion (normal) | 0.6 / * | E-4/°C | ISO 11359-1/-2 |
| Relative Temperature Index (Electrical, 0.71 / * mm) | 140 / * | °C | UL746B |
| Relative Temperature Index (Electrical, 3 / * mm) | 140 / * | °C | UL746B |
| Relative Temperature Index (with impact, 0.71 / * mm) | 120 / * | °C | UL746B |
| Relative Temperature Index (with impact, 3 / * mm) | 130 / * | °C | UL746B |
| Relative Temperature Index (without impact, 0.71 / * mm) | 120 / * | °C | UL746B |
| Relative Temperature Index (without impact, 3 / * mm) | 130 / * | °C | UL746B |
Table 3 of 6
8 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Relative Permittivity (100Hz) | 4 / 10 | — | IEC 62631-2-1 |
| Relative Permittivity (1 MHz) | 3.6 / 4 | — | IEC 62631-2-1 |
| Dissipation Factor (100 Hz) | 50 / 3000 | E-4 | IEC 62631-2-1 |
| Dissipation Factor (1 MHz) | 140 / 1000 | E-4 | IEC 62631-2-1 |
| Volume Resistivity | 1E12 / 1E10 | Ohm*m | IEC 62631-3-1 |
| Surface Resistivity | - / 1E13 | Ohm | IEC 62631-3-2 |
| Electric Strength | 35 / 30 | kV/mm | IEC 60243-1 |
| Comparative Tracking Index | 500 / 500 | V | IEC 60112 |
Table 4 of 6
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Water Absorption | 5.5 / * | % | Sim. to ISO 62 |
| Humidity Absorption | 1.5 / * | % | Sim. to ISO 62 |
| Density | 1410 / - | kg/m³ | ISO 1183 |
Table 5 of 6
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melt Volume-Flow Rate (at 275 / * °C, 5 / * kg) | 10.6 / * | cm³/10min | ISO 1133 |
| Melt Flow Index (at 275 / * °C, 5 / * kg) | 13.3 / * | g/10min | ISO 1133 |
| Molding Shrinkage (parallel) | 0.2 / * | % | Sim. to ISO 294-4 |
| Molding Shrinkage (normal) | 1 / * | % | Sim. to ISO 294-4 |
Химическая стойкость
384 rows| Characteristic | Value | Unit |
|---|---|---|
| Other | Acetaldehyde (40% by mass) at 23°C | limited resistant, tests necessary to verify |
| Other | Acetamide (50% by mass) at 23°C | limited resistant, tests necessary to verify |
| Other | Acetamide (50% by mass) at >140°C | not resistant |
| Other | Acetic acid (10% by mass) at 100°C | not resistant |
| Other | Acetic acid (10% by mass) at 23°C | limited resistant, tests necessary to verify |
| Other | Acetic acid (95% by mass) at 23°C | not resistant |
| Ketones | Acetone at 23°C | resistant |
| Other | Acetophenone at 23°C | resistant |
| Other | Acetyl chloride at 23°C | not resistant |
| Other | Acetylene at 23°C | resistant |
| Other | Acrylic acid at 23°C | not resistant |
| Other | Aliphatic amines at 23°C | resistant |
