To catalogue
Akulon® CO-KGV4/A JN.00.86
- Chemical Family
- Polyamides
Akulon® CO-KGV4/A JN.00.86 is a polyamide 6 (PA 6) composite material that is 20% glass-reinforced, heat stabilized, and flame retardant without the use of halogen or phosphorous. It is characterized by its lightweight nature and UL flame rating. This material is applied in the automotive and transportation industries for both exterior and interior components, as well as in the electrical and electronics sectors for parts and components, including circuit breakers.
Other characteristics
- Brand
- Akulon®
- Polymer Name
- Polyamide 6 (PA 6)
- Fillers Included
- Glass Fiber
- Additives Included
- Heat Stabilizer
- Processing Methods
- Injection Molding, Injection Molding
- Reinforcement Material
- Glass Fibers
- Markets
- Automotive & Transportation
- Electrical & Electronics
- Flame Rating
- UL 94 V2
- Technology
- Composite Materials
- Plastics
- Packaging Type
- Bags
- Boxes
- Silos
- Super Sacks
- Labeling Claims
- Halogen-free
- Phosphorus-free
- Material Features
- Flame Retardant
- Heat Stabilized
- Light Weight
- UL Flame Rated
- Reinforcement Form
- Tape
- Unidirectional Fabric
- Certifications and Compliance
- ISO 14001
- OHSAS
- REACH (Europe)
- UL 94
- Composite Materials Functions
- Resins Binders & Matrix Materials
- Composites Processing Methods
- Injection Molding
- Plastics and Elastomers End Uses
- Door Panel
- Flooring
- Molded Case Circuit Breakers
- Wheel Housing Parts
- Plastics and Elastomers Functions
- Resin
Technical data
Table 1 of 6
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Modulus | 4800 / - | MPa | ISO 527-1/-2 |
| Stress at Break | 63 / - | MPa | ISO 527-1/-2 |
| Strain at Break | 3 / - | % | ISO 527-1/-2 |
| Charpy Notched Impact Strength (at +23°C) | 2 / - | kJ/m² | ISO 179/1eA |
Table 2 of 6
13 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melting Temperature (10°C/min) | 220 / * | °C | ISO 11357-1/-3 |
| Burning Behaviour (at 1.5 mm Nominal Thickness) | UL V-2 / * | class | IEC 60695-11-10 |
| Burning Behaviour (at 3.0 mm Nominal Thickness) | UL V-2 / * | class | IEC 60695-11-10 |
| Burning Behaviour (at 0.75 mm Nominal Thickness) | V-2 / * | class | IEC 60695-11-10 |
| Ball Pressure Temperature | 200 / * | °C | IEC 60695-10-2 |
| Glow Wire Flammability Index (at thickness 1.6 / - mm) | 960 / - | °C | IEC 60695-2-12 |
| Glow Wire Flammability Index (at thickness 0.8 / - mm) | 960 / - | °C | IEC 60695-2-12 |
| Glow Wire Ignition Temperature (at thickness 1.6 / - mm) | 725 / - | °C | IEC 60695-2-13 |
| Glow Wire Ignition Temperature (at thickness 0.8 / - mm) | 725 / - | °C | IEC 60695-2-13 |
| Relative Temperature Index (Electrical, 0.8 / *mm) | 140 / * | °C | UL746B |
| Relative Temperature Index (Electrical, 3 / *mm) | 140 / * | °C | UL746B |
| Relative Temperature Index (without impact, 0.8 / * mm) | 130 / * | °C | UL746B |
Table 3 of 6
8 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Relative Permittivity (100Hz) | 4.3 / 10 | — | IEC 62631-2-1 |
| Relative Permittivity (1 MHz) | 3.8 / 3.9 | — | IEC 62631-2-1 |
| Dissipation Factor (100 Hz) | 130 / 3000 | E-4 | IEC 62631-2-1 |
| Dissipation Factor (1 MHz) | 210 / 1000 | E-4 | IEC 62631-2-1 |
| Volume Resistivity | 1E13 / 1E11 | Ohm*m | IEC 62631-3-1 |
| Surface Resistivity | - / 1E14 | Ohm | IEC 62631-3-2 |
| Electric Strength | 30 / 25 | kV/mm | IEC 60243-1 |
| Comparative Tracking Index | 600 / - | V | IEC 60112 |
Table 4 of 6
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Water Absorption | 6.5 / * | % | Sim. to ISO 62 |
| Humidity Absorption | 2 / * | % | Sim. to ISO 62 |
| Density | 1340 / - | kg/m³ | ISO 1183 |
Table 5 of 6
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Molding Shrinkage (parallel) | 1.1 / * | % | Sim. to ISO 294-4 |
| Molding Shrinkage (normal) | 1.1 / * | % | Sim. to ISO 294-4 |
Химическая стойкость
385 rows| Characteristic | Value | Unit |
|---|---|---|
| Other | Acetaldehyde (40% by mass) at 23°C | limited resistant, tests necessary to verify |
| Other | Acetamide (50% by mass) at 23°C | limited resistant, tests necessary to verify |
| Other | Acetamide (50% by mass) at >140°C | not resistant |
| Other | Acetic acid (10% by mass) at 100°C | not resistant |
| Other | Acetic acid (10% by mass) at 23°C | limited resistant, tests necessary to verify |
| Other | Acetic acid (95% by mass) at 23°C | not resistant |
| Ketones | Acetone at 23°C | resistant |
| Other | Acetophenone at 23°C | resistant |
| Other | Acetyl chloride at 23°C | not resistant |
| Other | Acetylene at 23°C | resistant |
| Other | Acrylic acid at 23°C | not resistant |
| Other | Aliphatic amines at 23°C | resistant |
