Stanyl® TW200F8

Chemical Family: Polyamides

Stanyl® TW200F8 is a high-performance polyamide that provides unmatched performance and value for demanding applications in which superior heat resistance, design stiffness, wear and friction, and process flow qualities are required. This high-performance polyamide 46 is used for applications in automotive, E&E, gears, and outdoor power equipment. Since it retains its mechanical properties at high temperatures up to 220 °C, this makes it ideal for extremely high-performance applications, where it outperforms PPA, PA6T, PA9T, and often PPS and LCP. A suitable processing technology for the product is injection molding. Special features include heat stabilization.

Product families

Plastics — Engineering & Specialty Polymers

Polyamides

Other characteristics

Brand: Stanyl
Polymer Name: Polyamide 46 (PA 46)
Fillers Included: Glass Fiber
Flexural Modulus: 11800.0 - 11800.0 MPa
Additives Included: Heat Stabilizer, Lubricant (Unspecified)
Heat Stabilizer
Lubricant (Unspecified)
Processing Methods: Injection Molding
Safety: For the safety properties of the material, we refer to our SDS which can be ordered at our sales offices. During practical operation we advise to wear personal safety protections for hand/eye/body.
Markets: Automotive & Transportation
Electrical & Electronics
Flame Rating: UL 94 HB
Technology: Plastics
OEM Standards: Chrysler
Ford
General Motors
Volvo
Packaging Type: Bags
Boxes
Silos
Super Sacks
Quality Standards: UL Yellow Card (E43392)
Material Features: Heat Resistance
Lubricated
UL Flame Rated
OEM Specifications: CHRYSLER MS-50017 CPN4421
FORD WSF-M4D846-A
GM GMW15702-013561-PA46 GF 40
GM GMW17410P-PA46 GF 40
VOLVO STD 121212-4
Certifications and Compliance: ISO 14001
OHSAS
REACH (Europe)
UL 94
Sensor Application Data: ForTii® PA4T and Stanyl® PA46 allow for reliable solutions due to their high melting point of 325 and 295 °C resulting in no deformation at very high sensor tip temperatures and to their resistance to erosion from contamination in the exhaust stream. ForTii® PA4T and Stanyl® PA4 allow for cost effective solutions versus PEEK, LCP or other PPA
Plastics and Elastomers End Uses: Air Ducts
Alternator Parts
Automotive E-Motor Bobbins
Brush Holders
Coil Insulation
Cooler Caps
EGR Sensor
Endlaminates

Technical data

Table 1 of 8

45 rows

Characteristic	Value	Unit	Method
Tensile Modulus	13000 / 8000	MPa	ISO 527-1/-2
Tensile Modulus (-40°C)	13200 / -	MPa	ISO 527-1/-2
Tensile Modulus (100°C)	7700 / -	MPa	ISO 527-1/-2
Tensile Modulus (120°C)	6900 / -	MPa	ISO 527-1/-2
Tensile Modulus (140°C)	6500 / *	MPa	ISO 527-1/-2
Tensile Modulus (150°C)	6300 / *	MPa	ISO 527-1/-2
Tensile Modulus (160°C)	6100 / *	MPa	ISO 527-1/-2
Tensile Modulus (180°C)	5600 / *	MPa	ISO 527-1/-2
Tensile Modulus (200°C)	5200 / *	MPa	ISO 527-1/-2
Tensile Modulus (210°C)	5000 / *	MPa	ISO 527-1/-2
Stress at Break	235 / 140	MPa	ISO 527-1/-2
Stress at Break (-40°C)	285 / -	MPa	ISO 527-1/-2

Table 2 of 8

16 rows

Characteristic	Value	Unit	Method
Melting Temperature (10°C/min)	295 / *	°C	ISO 11357-1/-3
Glass Transition Temperature (at 10°C/min)	75 / *	°C	ISO 11357-1/-2
Temperature of Deflection Under Load (1.80 MPa)	290 / *	°C	ISO 75-1/-2
Temperature of Deflection Under Load (0.45 MPa)	290 / *	°C	ISO 75-1/-2
Vicat Softening Temperature (50°C/h 50N)	290 / *	°C	ISO 306
Coefficient of Linear Thermal Expansion (parallel)	0.25 / *	E-4/°C	ISO 11359-1/-2
Coefficient of Linear Thermal Expansion (normal)	0.5 / *	E-4/°C	ISO 11359-1/-2
Burning Behaviour (at 1.5 mm Nominal Thickness)	UL HB / *	class	IEC 60695-11-10
Oxygen Index	22 / *	%	ISO 4589-1/-2
Relative Temperature Index (Electrical, 1.5 / * mm)	65 / *	°C	UL746B
Relative Temperature Index (with impact, 1.5 / * mm)	65 / *	°C	UL746B
Relative Temperature Index (without impact, 1.5 / * mm)	65 / *	°C	UL746B

Table 3 of 8

8 rows

Characteristic	Value	Unit	Method
Relative Permittivity (100Hz)	4.3 / 16	—	IEC 62631-2-1
Relative Permittivity (1 MHz)	4 / 4.7	—	IEC 62631-2-1
Dissipation Factor (100 Hz)	70 / 6000	E-4	IEC 62631-2-1
Dissipation Factor (1 MHz)	200 / 1000	E-4	IEC 62631-2-1
Volume Resistivity	1E12 / 1E8	Ohm*m	IEC 62631-3-1
Surface Resistivity	- / 1E13	Ohm	IEC 62631-3-2
Electric Strength	30 / 20	kV/mm	IEC 60243-1
Comparative Tracking Index	300 / -	V	IEC 60112

Table 4 of 8

1 row

Characteristic	Value	Unit	Method
Viscosity Number	145 / *	cm³/g	ISO 307, 1157, 1628

Table 5 of 8

4 rows

Characteristic	Value	Unit
Density of Melt	1320 / *	kg/m³
Thermal Conductivity of Melt	0.344 / *	W/(m K)
Specific Heat Capacity Melt	1930 / *	J/(kg K)
Effective Thermal Diffusivity	1.36E-7 / *	m²/s

Table 6 of 8