SYNTHALAT W 46
- CASE Ingredients Functions
- Binder & Resin
- Chemical Family
- Alkyds, Alkyds (Modified)AlkydsAlkyds (Modified)
SYNTHALAT W 46 is a water-dilutable, specially modified alkyd resin. This is recommended for water-dilutable priming and top coat paints with good drying, as well as fast initial water resistance. It has applications in metal coatings, marine coatings, industrial coatings, and maintenance.
Product families
Applications
- Marine Coatings
- Marine Coatings
- Industrial Coatings
- Industrial Maintenance
- Metal Coatings
- Marine
Product Families
- Alkyds
Other characteristics
- Brand
- SYNTHALAT
- End Uses
- Top Coat
- Compatible Substrates & Surfaces
- Metal
- Carrier
- Water
- Markets
- Automotive & Transportation
- Paints & Coatings
- Appearance
- Opaque
- Composition
SYNTHALAT W 46 has a Composition of Oil Type: drying fatty acid Oil content: approx. 46 %
- Cure
- Chemical Cure
- Supplied As
40 % in butyl glykol/ammonia/water (7 : 2,5 : 50,5)
- Technology
- CASE Ingredients
- Coating End Applications
- Top Coat
- Film Properties and Processing
SYNTHALAT W 46 is used in Appropriately formulated paints to have a good body and exceptionally high gloss and content less than 5% solvents. The priming and top coat paints are resistant to rain, mist and high atmospheric humidity both after forced drying of e.g. 15 min/85°C and after 24 h room temperature. These paints are used for agricultural machinery and general industry. For Synthalat W46 we recommend drier combination as follows: 0,05 – 0,15% Co + 0,05-0,15% Mn for primers and colored systems 0,05%Co, 0,1% Ca, 0,1-0,6% Zr for white pigmented systems (relative to metal content on solids) We recommend the use of water emulsified driers, incorporation should take place in mill base. Use of basic anti-corrosive pigments is not recommended, compatibility with certain anticorrosive pigments should be tested.
- Compatible Substrates and Surfaces
- Metal
Technical data
Table 1 of 1
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Viscosity | 1.000-4.000 | mPas | AV-F-V005 |
| Density | approx. 1.013 | g/ml | AV-F-0D001 |
| Flash Point | approx. 62 | °C | AV-F-f006 |
| Non Volatile Content | 40.0 | w % | AV-F-F003 |
| pH | 8.0-9.0 | — | AV-F-P001 |
