SYNTHALAT W 30
- CASE Ingredients Functions
- Binder & Resin
- Chemical Family
- Alkyds, Alkyds (Short Oil)AlkydsAlkyds (Short Oil)
SYNTHALAT W 30 is a water-thinnable, short-oil alkyd resin. It is recommended for water-dilutable corrosion protection priming paints with good elasticity and hardness. It has applications in metal coatings, industrial coatings, marine coatings, industrial maintenance, industrial coatings, and marine transportation.
Product families
Applications
- Marine Coatings
- Marine Coatings
- Industrial Coatings
- Industrial Maintenance
- Metal Coatings
- Marine
Product Families
- Alkyds
Other characteristics
- Brand
- SYNTHALAT
- Compatible Substrates & Surfaces
- Metal
- Carrier
- Water
- Markets
- Automotive & Transportation
- Paints & Coatings
- Composition
SYNTHALAT W 30 has a composition Oil type: drying fatty acids Oil content: approx. 30 %
- Cure
- Chemical Cure
- Supplied As
- 75 % in sec. Butanol/Butyl glycol (2:1)
- Technology
- CASE Ingredients
- Film Properties and Processing
Synthalat W 30 is water thinnable after neutralization with amines of ammonia. With primer formulations on steel in a 60 μm dry film, 240 h are achieved in the salt spray test according to DIN 50021. In combination with LIOCRYL AS 610 or AS 615 for hybrid systems. A faster non-tackiness and paints with less than 5% solvent are thereby obtained. Further application are single coat systems with excellent anti-corrosive properties and hioghgloss top coats. pH-value of formulated paints should be measured and adjusted to 8,0-8,5 after grinding. For air-drying formulations with Synthalat W30 we recommend drier combinations as follows: 0,05-0,15% Co, 0,05-0,15%Mn for primers and colored paints 0,05-0,15% Co and 0,1-0,6%Zr for white pigmented systems (calculated as metal content on solids).
- Compatible Substrates and Surfaces
- Metal
Technical data
Table 1 of 1
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Viscosity | 100-140 | mPas | AV-F-V005 |
| Acid Value | 37-40 | mg KOH/g | — |
| Color | max. 3 | Iodine | — |
| Density | approx. 1.04 | g/ml | AV-F-0D001 |
| Flash Point | 33.0 | °C | AV-F-f006 |
| Non Volatile Content | 75.0 | w % | AV-F-F003 |
