Stanyl® HGR2 BK00001
- Chemical Family
- Polyamides
Stanyl® HGR2 BK00001 is a high-performance polyamide that provides unmatched performance and value for demanding applications in which superior heat resistance, design stiffness, wear and friction, and process flow qualities are required. This high-performance polyamide 46 is used for applications in automotive, E&E, gears, and outdoor power equipment. Since it retains its mechanical properties at high temperatures up to 220 °C, this makes it ideal for extremely high-performance applications, where it outperforms PPA, PA6T, PA9T, and often PPS and LCP. A suitable processing technology for the product is injection molding. Special features include being heat stabilized, wear modified, and friction modified.
Product families
Applications
- Powertrain & UTH
Product Families
- Polyamides
Other characteristics
- Brand
- Stanyl
- Polymer Name
- Polyamide 46 (PA 46)
- Flexural Modulus
- 2900.0 - 2900.0 MPa
- Additives Included
- Heat Stabilizer
- Processing Methods
- Injection Molding
- Markets
- Automotive & Transportation
- Technology
- Plastics
- OEM Standards
- Callout
- Chrysler
- Packaging Type
- Bags
- Boxes
- Silos
- Super Sacks
- Material Features
- Friction Resistant
- Heat Resistance
- Heat Stabilized
- Low Friction
- Low Wear
- Tribological Modified
- Wear Resistant
- OEM Specifications
- CALLOUT ASTM D6779 PA0620 B50380 LD010
- CHRYSLER MS-50017 CPN5249
- Certifications and Compliance
- ISO 14001
- OHSAS
- REACH (Europe)
- Plastics and Elastomers End Uses
- Automotive Drivetrain
- Automotive Gears
- Front End Accessory Drives (FEAD)
- New Generation Slide Shoe Surfaces
- Slide Shoe Surfaces In New Generation
- Timing Chain
- Plastics and Elastomers Functions
- Resin
- Timing Drive Systems Application Data
Stanyl® delivers best-in-class low-friction performance for improved efficiency; Stanyl® is a proven solution used by the world's top automakers; All grades are PFAS and PFOA free to ensure regulatory compliance and protect the environment; Bio-based material solutions available
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 6
31 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Modulus | 3100 / 900 | MPa | ISO 527-1/-2 |
| Tensile Modulus (-40°C) | 3500 / - | MPa | ISO 527-1/-2 |
| Tensile Modulus (100°C) | 860 / - | MPa | ISO 527-1/-2 |
| Tensile Modulus (120°C) | 770 / - | MPa | ISO 527-1/-2 |
| Tensile Modulus (140°C) | 700 / * | MPa | ISO 527-1/-2 |
| Tensile Modulus (160°C) | 650 / * | MPa | ISO 527-1/-2 |
| Tensile Modulus (180°C) | 600 / * | MPa | ISO 527-1/-2 |
| Tensile Modulus (200°C) | 560 / * | MPa | ISO 527-1/-2 |
| Yield Stress | 90 / 50 | MPa | ISO 527-1/-2 |
| Yield Stress (at 100°C) | 50 / * | MPa | ISO 527-1/-2 |
| Yield Stress (at 120°C) | 45 / * | MPa | ISO 527-1/-2 |
| Yield Stress (at 160°C) | 40 / * | MPa | ISO 527-1/-2 |
Table 2 of 6
11 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melting Temperature (10°C/min) | 295 / * | °C | ISO 11357-1/-3 |
| Glass Transition Temperature (at 10°C/min) | 75 / * | °C | ISO 11357-1/-2 |
| Temperature of Deflection Under Load (1.80 MPa) | 190 / * | °C | ISO 75-1/-2 |
| Temperature of Deflection Under Load (0.45 MPa) | 290 / * | °C | ISO 75-1/-2 |
| Vicat Softening Temperature (50°C/h 50N) | 290 / * | °C | ISO 306 |
| Coefficient of Linear Thermal Expansion (parallel) | 0.85 / * | E-4/°C | ISO 11359-1/-2 |
| Coefficient of Linear Thermal Expansion (normal) | 1.1 / * | E-4/°C | ISO 11359-1/-2 |
| Thermal Index (2500 hrs) | 163 / * | °C | IEC 60216/ISO 527-1/-2 |
| Thermal Index (5000 hrs) | 152 / * | °C | IEC 60216/ISO 527-1/-2 |
| Thermal Index (10000 hrs) | 141 / * | °C | IEC 60216/ISO 527-1/-2 |
| Thermal Index (20000 hrs) | 130 / * | °C | IEC 60216/ISO 527-1/-2 |
Table 3 of 6
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Viscosity Number | 190 / * | cm³/g | ISO 307, 1157, 1628 |
Table 4 of 6
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Water Absorption | 11.4 / * | % | Sim. to ISO 62 |
| Water Absorption in Water (at 23°C after 24h) | 3.3 / * | % | ISO 62 |
| Humidity Absorption | 3.2 / * | % | Sim. to ISO 62 |
| Density | 1260 / - | kg/m³ | ISO 1183 |
Table 5 of 6
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Molding Shrinkage (parallel) | 2 / * | % | Sim. to ISO 294-4 |
| Molding Shrinkage (normal) | 2 / * | % | Sim. to ISO 294-4 |
| Spiral Flow Length 1.0 mm 800 bar | 115 / * | mm | — |
| Spiral Flow Length 1.0 mm 900 bar | 125 / * | mm | — |
| Spiral Flow Length 1.0 mm 1000 bar | 135 / * | mm | — |
Химическая стойкость
377 rows| Characteristic | Value | Unit |
|---|---|---|
| Other | Acetaldehyde (40% by mass) at 23°C | resistant |
| Other | Acetamide (50% by mass) at 23°C | limited resistant, tests necessary to verify |
| Other | Acetamide (50% by mass) at >140°C | not resistant |
| Other | Acetic acid (10% by mass) at 100°C | not resistant |
| Other | Acetic acid (10% by mass) at 23°C | limited resistant, tests necessary to verify |
| Other | Acetic acid (95% by mass) at 23°C | not resistant |
| Ketones | Acetone at 23°C | resistant |
| Other | Acetophenone at 23°C | resistant |
| Other | Acetyl chloride at 23°C | not resistant |
| Other | Acetylene at 23°C | resistant |
| Other | Acrylic acid at 23°C | not resistant |
| Other | Aliphatic amines at 23°C | resistant |
