Stanyl® TE200F6

Chemical Family: Polyamides

Stanyl® TE200F6 is a high-performance polyamide that provides unmatched performance and value for demanding applications in which superior heat resistance, design stiffness, wear and friction, and process flow qualities are required. This high-performance polyamide 46 is used for applications in automotive, E&E, gears, and outdoor power equipment. Since it retains its mechanical properties at high temperatures up to 220 °C, this makes it ideal for extremely high-performance applications, where it outperforms PPA, PA6T, PA9T, and often PPS and LCP. A suitable processing technology for the product is injection molding. Special features include heat stabilization.

Product families

Applications

Automotive & Transportation — Automotive

Electrical & Electronic Systems

Electrical & Electronics — Devices & Assemblies

Automotive Electronics

Electrical & Electronics — Parts & Components

Connectors

Product Families

Plastics — Engineering & Specialty Polymers

Polyamides

Other characteristics

Brand: Stanyl
Polymer Name: Polyamide 46 (PA 46)
Fillers Included: Glass Fiber
Flexural Modulus: 9500.0 - 9500.0 MPa
Additives Included: Heat Stabilizer
Processing Methods: Injection Molding
Markets: Automotive & Transportation
Electrical & Electronics
Flame Rating: UL 94 HB
Technology: Plastics
OEM Standards: General Motors
Packaging Type: Bags
Boxes
Silos
Super Sacks
Quality Standards: UL Yellow Card (E43392)
UL Yellow Card (E47960)
Material Features: Heat Resistance
High Temperature Strength
UL Flame Rated
OEM Specifications: GM GMW15702-110038
Certifications and Compliance: ISO 14001
OHSAS
REACH (Europe)
UL 94
Fuse Holders Application Data: Akulon® PA6, Arnite® PBT and Stanyl® PA46 allow for reliable solutions due to their high temperature resistance (much higher than PP) and due to their good electrical insulation properties. Akulon® PA6, Arnite® PBT and Stanyl® PA46 allow for cost effective solutions due to their ease of processability
Plastics and Elastomers End Uses: Automotive Electronics
Connectors
Fuse Holders
Plastics and Elastomers Functions: Resin
Automotive Connectors Application Data: Stanyl® PA46, ForTii® PA4T, EcoPaXX® PA410, Akulon® PA66, Akulon® PA6, Arnite® PBT allow for reliable solutions due to high temperature resistance, high mechanical property levels and good electrical insulation properties; Stanyl® PA46 allows for cost effective solutions due to a better flowability and processability than PPS and PPA enabling therefore thin wall designs; ForTii® PA4T allows for reliable solutions exposed to very high peak temperatures due to its melting point of 325 C
Plastics and Elastomers Processing Methods: Injection Molding

Technical data

Table 1 of 8

58 rows

Characteristic	Value	Unit	Method
Tensile Modulus	10000 / 6000	MPa	ISO 527-1/-2
Tensile Modulus (-40°C)	10200 / -	MPa	ISO 527-1/-2
Tensile Modulus (40°C)	9500 / -	MPa	ISO 527-1/-2
Tensile Modulus (100°C)	5500 / -	MPa	ISO 527-1/-2
Tensile Modulus (120°C)	5300 / -	MPa	ISO 527-1/-2
Tensile Modulus (140°C)	5100 / *	MPa	ISO 527-1/-2
Tensile Modulus (150°C)	5000 / *	MPa	ISO 527-1/-2
Tensile Modulus (160°C)	4750 / *	MPa	ISO 527-1/-2
Tensile Modulus (180°C)	4550 / *	MPa	ISO 527-1/-2
Tensile Modulus (200°C)	4300 / *	MPa	ISO 527-1/-2
Tensile Modulus (210°C)	4200 / *	MPa	ISO 527-1/-2
Tensile Modulus (Low Thickness, 1mm) - Dry	10000	MPa	ISO 527-1/-2

Table 2 of 8

18 rows

Characteristic	Value	Unit	Method
Melting Temperature (10°C/min)	295 / *	°C	ISO 11357-1/-3
Glass Transition Temperature (at 10°C/min)	75 / *	°C	ISO 11357-1/-2
Temperature of Deflection Under Load (1.80 MPa)	290 / *	°C	ISO 75-1/-2
Temperature of Deflection Under Load (0.45 MPa)	290 / *	°C	ISO 75-1/-2
Vicat Softening Temperature (50°C/h 50N)	290 / *	°C	ISO 306
Coefficient of Linear Thermal Expansion (parallel)	0.25 / *	E-4/°C	ISO 11359-1/-2
Coefficient of Linear Thermal Expansion (normal)	0.6 / *	E-4/°C	ISO 11359-1/-2
Burning Behaviour (at 1.5 mm Nominal Thickness)	UL HB / *	class	IEC 60695-11-10
Burning Behaviour (at 3.0 mm Nominal Thickness)	UL HB / *	class	IEC 60695-11-10
Oxygen Index	22 / *	%	ISO 4589-1/-2
Glow Wire Flammability Index (at thickness 3 / - mm)	925 / -	°C	IEC 60695-2-12
Glow Wire Flammability Index (at thickness 0.75 / - mm)	675 / -	°C	IEC 60695-2-12

Table 3 of 8

10 rows

Characteristic	Value	Unit	Method
Relative Permittivity (100Hz)	4.4 / 12	—	IEC 62631-2-1
Relative Permittivity (1 MHz)	4 / 4.6	—	IEC 62631-2-1
Relative Permittivity (1GHz)	3.6 / -	—	IEC 60250
Dissipation Factor (100 Hz)	80 / 1500	E-4	IEC 62631-2-1
Dissipation Factor (1 MHz)	230 / 900	E-4	IEC 62631-2-1
Dissipation Factor (1GHz)	300 / -	E-4	IEC 60250
Volume Resistivity	1E13 / 1E9	Ohm*m	IEC 62631-3-1
Surface Resistivity	- / 1E14	Ohm	IEC 62631-3-2
Electric Strength	35 / 25	kV/mm	IEC 60243-1
Comparative Tracking Index	500 / -	V	IEC 60112

Table 4 of 8

1 row

Characteristic	Value	Unit	Method
Viscosity Number	145 / *	cm³/g	ISO 307, 1157, 1628

Table 5 of 8

4 rows

Characteristic	Value	Unit
Density of Melt	1280 / *	kg/m³
Thermal Conductivity of Melt	0.28 / *	W/(m K)
Specific Heat Capacity Melt	2430 / *	J/(kg K)
Effective Thermal Diffusivity	9.02E-8 / *	m²/s

Table 6 of 8