Stanyl® TC502
- Chemical Family
- Polyamides
Stanyl® TC502 is a high-performance polyamide that provides unmatched performance and value for demanding applications in which superior heat resistance, design stiffness, wear and friction, and process flow qualities are required. This high-performance polyamide 46 is used for applications in automotive, E&E, gears, and outdoor power equipment. Since it retains its mechanical properties at high temperatures up to 220 °C, this makes it ideal for extremely high-performance applications, where it outperforms PPA, PA6T, PA9T, and often PPS and LCP. A suitable processing technology for the product is injection molding, which is thermally conductive.
Product families
Applications
- Automotive Lighting
- Electrical & Electronic Systems
- Automotive Electronics
Product Families
- Polyamides
Other characteristics
- Brand
- Stanyl
- Polymer Name
- Polyamide 46 (PA 46)
- Fillers Included
- Glass Fiber
- Processing Methods
- Injection Molding
- Markets
- Automotive & Transportation
- Electrical & Electronics
- Technology
- Plastics
- Packaging Type
- Bags
- Boxes
- Silos
- Super Sacks
- Material Features
- Good Thermal Conductivity
- Heat Resistance
- Thermally Conductive
- Certifications and Compliance
- ISO 14001
- OHSAS
- REACH (Europe)
- Plastics and Elastomers End Uses
- Automotive Electronics
- Lighting Applications
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
- Application Data
- Weight reduction by replacing die cast Aluminum
- Higher Functional integration than metal
- Lower manufacturing cost
- LED Headlight Lighting Modules and Lensholders Application Data
Arnite® XL-T allows for reliable solutions due to its heat deflection temperature (HDT) of 250°C, its thermoconductivity and its low outgassing and excellent textured surface finish in dark colors implying high design freedom. Arnite® XL-T allows for cost effective and light weight solutions as compared to PES, PEI and PPA, since aluminum heatshields are not necessary when using XL-T
Technical data
Table 1 of 6
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Modulus | 9000 / - | MPa | ISO 527-1/-2 |
| Stress at Break | 65 / - | MPa | ISO 527-1/-2 |
| Strain at Break | 1.1 / - | % | ISO 527-1/-2 |
Table 2 of 6
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melting Temperature (10°C/min) | 295 / * | °C | ISO 11357-1/-3 |
| Glass Transition Temperature (at 10°C/min) | 75 / * | °C | ISO 11357-1/-2 |
| Coefficient of Linear Thermal Expansion (parallel) | 0.25 / * | E-4/°C | ISO 11359-1/-2 |
| Coefficient of Linear Thermal Expansion (normal) | 0.35 / * | E-4/°C | ISO 11359-1/-2 |
| Thermal Conductivity in Plane | 14 / * | W/(m K) | ASTM E1461 |
| Thermal Conductivity Through Plane | 2.1 / * | W/(m K) | ASTM E1461 |
Table 3 of 6
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Volume Resistivity | 10000 / - | Ohm*m | IEC 62631-3-1 |
| Surface Resistivity | - / 1E7 | Ohm | IEC 62631-3-2 |
Table 4 of 6
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Humidity Absorption | 2 / * | % | Sim. to ISO 62 |
| Density | 1420 / - | kg/m³ | ISO 1183 |
Table 5 of 6
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Molding Shrinkage (parallel) | 0.6 / * | % | ISO 294-4 |
| Molding Shrinkage (normal) | 1.2 / * | % | ISO 294-4 |
Химическая стойкость
377 rows| Characteristic | Value | Unit |
|---|---|---|
| Other | Acetaldehyde (40% by mass) at 23°C | resistant |
| Other | Acetamide (50% by mass) at 23°C | limited resistant, tests necessary to verify |
| Other | Acetamide (50% by mass) at >140°C | not resistant |
| Other | Acetic acid (10% by mass) at 100°C | not resistant |
| Other | Acetic acid (10% by mass) at 23°C | limited resistant, tests necessary to verify |
| Other | Acetic acid (95% by mass) at 23°C | not resistant |
| Ketones | Acetone at 23°C | resistant |
| Other | Acetophenone at 23°C | resistant |
| Other | Acetyl chloride at 23°C | not resistant |
| Other | Acetylene at 23°C | resistant |
| Other | Acrylic acid at 23°C | not resistant |
| Other | Aliphatic amines at 23°C | resistant |
