Pangel OM4
- CASE Ingredients Features
- Anti-SettlingCorrosion ResistanceGood LevelingHigh Sagging ResistanceImproved Rheology
- Chemical Family
- Bentonite
Pangel OM4 is a rheological additive for intermediate to low-polarity systems, based on a highly purified bentonite clay. Pangel OM4 shows particularly good performance in aliphatic and aromatic solvents. Pangel OM4 is recommended for both aliphatic solvents and mineral or synthetic oils.
Properties
- Physical Form
- Powder
Identification
- CASE Ingredients Functions
- Rheology Modifier
Product families
Applications
- Architectural Coatings
- Architectural Coatings
- Industrial Coatings
- Overprint Varnishes
- Primers & Lacquers
- Overprint Varnishes
- Primers & Lacquers
Product Families
- Rheology Modifiers & Stabilizers
- Other Processing Additives
Other characteristics
- Brand
- Dar-Tech Pangel
- Features
Anti-Settling, Corrosion Resistance, Good Degreasing Performance, Good Leveling, High Sagging Resistance, Improved Rheology
- Functions
- Rheology Modifier
- Compatible Polymers & Resins
- Polyesters
- Note
** - Measured at production point. Moisture can vary according to relative humidity.
- Dosage
The dose of Pangel OM4 varies depending on the type of system and the degree of thickening or other properties desired. Addition levels are typically between 0.2 to 1.5%.
- Markets
- Building & Construction
- Paints & Coatings
- Printing & Packaging
- PACKAGING
- Available in multi-walled 25kg bags
- Appearance
- White/off powder
- Shelf LIfe
- 3 Years
- Key Features
Pangel OM4 is an organobentonite recommended for providing the following properties in solvent-borne systems:; Thixotropic and pseudoplastic effects; Sag control; Excellent leveling; Prevents pigment from long-term storage settling; High viscosity and excellent consistency over a wide range of temperatures.
- Technology
- CASE Ingredients
- Industrial Additives & Materials
- Packaging Type
- Bags
- Storage Condition
- Dry location protected from moisture.
- Country Availability
- Canada
- USA
- Fields of Application
- Anti-corrosive paints
- Polyester coatings
- Primers
- Industrial finishes
- Road marking paints
- Varnished
- Lubricating greases
- Bituminous undercoats
- Coating End Applications
- Primer
- Solventborne Coating
- Undercoat
- Varnishes
- Compatible Polymers and Resins
- Polyesters
- Industrial Additives Features
- Good Degreasing Performance
Technical data
Table 1 of 1
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Loss on Ignition (at 1000°C) | max. 35 | % |
| Moisture Content | max. 3.5 | % |
| Particle Size Distribution (dry sieving residue on 75 μm) | max. 2 | % |
| Moisture Content** | max. 3.5 | % |
