Pangel W
- CASE Ingredients Features
- Anti-SettlingBrushabilityCorrosion ResistanceGood Leveling
Pangel W is an organically modified sepiolite in powder form used to improve the anti-sagging properties of aqueous systems as well as its anti-sedimentation performance during storage. This thickener is manufactured through organic modification of rheological sepiolite, mainly for aqueous systems. It improves rheological characteristics in the range of shear forces affecting sagging and sedimentation properties while controlling consistency.
Properties
- Physical Form
- Powder
Identification
- CASE Ingredients Functions
- Rheology ModifierThickener
Other characteristics
- Brand
- Dar-Tech Pangel
- Features
Anti-Settling, Brushability, Corrosion Resistance, Good Leveling
- Functions
- Rheology Modifier, Thickener
- Compatible Polymers & Resins
- Epoxies (EP), Silicones
- Note
* - Suspension at 3% in water, stirred at low shear (3.6 m/s) for 20 minutes.
- Dosage
Pangel W must be added in the dispersion stage at any moment, however best results are obtained after addition of pigments and fillers at the end of the mill-base avoiding possible interactions with dispersants and wetting agents; High shear mixing for 5 - 10 minutes must be enough for the right dispersion. In addition, it can be incorporated as a pre- gel made previously in water.; To reach fully all the benefits of Pangel W a suitable pH level in the final formulation should be around 8 - 10. The pH adjustment point will depend on the type of formulation employed.; Recommended addition rate for Pangel W can vary significantly depending on the system. Typical addition levels are 0.1 - 1% of Pangel W by weight of total formulation.
- Markets
- Building & Construction
- Paints & Coatings
- Printing & Packaging
- PACKAGING
- Available in multi-walled 15 kg bags
- Use Levels
- 0.1 - 1%
- Appearance
- Free flowing powder
- Shelf LIfe
- 1 Year
- Composition
- Organically modified sepiolite
- Technology
- CASE Ingredients
- Industrial Additives & Materials
- Packaging Type
- Bags
- Storage Condition
- Dry and fresh places protected from moisture
- Country Availability
- Canada
- USA
- Fields of Application
- Water borne 2K epoxy paints
- Emulsion paints
- Water based industrial paints
- Pigment concentrates
- Silicate based coatings
- Ready mix adhesives
- Plasters
- Coating End Applications
- 2K (2 component) Coating
- Epoxy Coating
- Primer
- Waterborne Coating
Technical data
Table 1 of 1
2 rows| Characteristic | Value | Unit |
|---|---|---|
| Brookfield Viscosity* | 12,000 - 16,000 | mPa.s |
| Moisture Content | 4.0 - 10.0 | % |
