Stanyl® TC155

Chemical Family: Polyamides

Stanyl® TC155 is a high-performance polyamide that provides unmatched performance and value for demanding applications in which superior heat resistance, design stiffness, wear and friction, and process flow qualities are required. This high-performance polyamide 46 is used for applications in automotive, E&E, gears, and outdoor power equipment. Since it retains its mechanical properties at high temperatures up to 220 °C, this makes it ideal for extremely high-performance applications, where it outperforms PPA, PA6T, PA9T, and often PPS and LCP. A suitable processing technology for the product is injection molding. Special features include being heat-stabilized and thermally conductive.

Product families

Plastics — Engineering & Specialty Polymers

Polyamides

Other characteristics

Brand: Stanyl
Polymer Name: Polyamide 46 (PA 46)
Additives Included: Heat Stabilizer
Processing Methods: Injection Molding
Markets: Consumer Goods
Applications: Consumer Goods — Appliances & Electronics
Flame Rating: UL 94 V0
Technology: Plastics
Packaging Type: Bags
Boxes
Silos
Super Sacks
Quality Standards: UL Yellow Card (E47960)
Material Features: Flame Retardant
Good Thermal Conductivity
Heat Resistance
Heat Stabilized
Thermally Conductive
UL Flame Rated
Certifications and Compliance: ISO 14001
OHSAS
REACH (Europe)
UL 94
Plastics and Elastomers Functions: Resin
Plastics and Elastomers Processing Methods: Injection Molding

Technical data

Table 1 of 6

7 rows

Characteristic	Value	Unit	Method
Tensile Modulus	11000 / -	MPa	ISO 527-1/-2
Stress at Break	55 / -	MPa	ISO 527-1/-2
Strain at Break	0.6 / -	%	ISO 527-1/-2
Charpy Impact Strength (at +23°C)	10 / -	kJ/m²	ISO 179/1eU
Charpy Impact Strength (at -30°C)	10 / -	kJ/m²	ISO 179/1eU
Charpy Notched Impact Strength (at +23°C)	2 / -	kJ/m²	ISO 179/1eA
Charpy Notched Impact Strength (at -30°C)	1.6 / -	kJ/m²	ISO 179/1eA

Table 2 of 6

11 rows

Characteristic	Value	Unit	Method
Coefficient of Linear Thermal Expansion (parallel)	0.25 / *	E-4/°C	ISO 11359-1/-2
Coefficient of Linear Thermal Expansion (normal)	0.25 / *	E-4/°C	ISO 11359-1/-2
Thermal Conductivity in Plane	5 / *	W/(m K)	ASTM E1461
Thermal Conductivity Through Plane	1 / *	W/(m K)	ASTM E1461
Burning Behaviour (at 1.5 mm Nominal Thickness)	UL V-0 / *	class	IEC 60695-11-10
Burning Behaviour (at 3.0 mm Nominal Thickness)	UL V-0 / *	class	IEC 60695-11-10
Burning Behaviour 5V (at 1.6 mm thickness h)	5VA / *	class	IEC 60695-11-20
Glow Wire Flammability Index (at thickness 0.75 / - mm)	960 / -	°C	IEC 60695-2-12
Glow Wire Flammability Index (at thickness 3 / - mm)	960 / -	°C	IEC 60695-2-12
Glow Wire Ignition Temperature (at thickness 0.75 / - mm)	800 / -	°C	IEC 60695-2-13
Glow Wire Ignition Temperature (at thickness 3 / - mm)	825 / -	°C	IEC 60695-2-13

Table 3 of 6

5 rows

Characteristic	Value	Unit	Method
Relative Permittivity (5GHz)	3.89 / -	—	IEC 60250
Relative Permittivity (10GHz)	3.89 / -	—	IEC 60250
Dissipation Factor (5GHz)	60 / -	E-4	IEC 60250
Dissipation Factor (10GHz)	59 / -	E-4	IEC 60250
Comparative Tracking Index	575 / -	V	IEC 60112

Table 4 of 6

1 row

Characteristic	Value	Unit	Method
Density	1630 / -	kg/m³	ISO 1183

Table 5 of 6

2 rows

Characteristic	Value	Unit	Method
Molding Shrinkage (parallel)	0.3 / *	%	Sim. to ISO 294-4
Molding Shrinkage (normal)	0.3 / *	%	Sim. to ISO 294-4

Химическая стойкость

377 rows

Characteristic	Value	Unit
Other	Acetaldehyde (40% by mass) at 23°C	resistant
Other	Acetamide (50% by mass) at 23°C	limited resistant, tests necessary to verify
Other	Acetamide (50% by mass) at >140°C	not resistant
Other	Acetic acid (10% by mass) at 100°C	not resistant
Other	Acetic acid (10% by mass) at 23°C	limited resistant, tests necessary to verify
Other	Acetic acid (95% by mass) at 23°C	not resistant
Ketones	Acetone at 23°C	resistant
Other	Acetophenone at 23°C	resistant
Other	Acetyl chloride at 23°C	not resistant
Other	Acetylene at 23°C	resistant
Other	Acrylic acid at 23°C	not resistant
Other	Aliphatic amines at 23°C	resistant