LIOCRYL AS 610
- CASE Ingredients Functions
- Binder & Resin
- Chemical Family
- Styrene-Acrylic Copolymer
LIOCRYL AS 610 is an aqueous styrene acrylic emulsion. If it is combined with LIOPUR 2004-119, coatings on plastics with good adhesion properties are possible, though it should be borne in mind that every plastic behaves differently and requires its own formulation. It has applications in industrial coatings, wood coatings and finishes, metal coatings, crafts and hobby, architectural coatings, and other consumer-good applications.
Properties
- Physical Form
- Emulsion
- Liquid
Product families
- Acrylics
Other characteristics
- Brand
- LIOCRYL
- End Uses
- Varnishes
- Compatible Substrates & Surfaces
- Metal, Plastics, Wood
- Carrier
- Water
- Markets
- Adhesives & Sealants
- Building & Construction
- Consumer Goods
- Paints & Coatings
- Storage
LIOCRYL AS 610 has the emulsion which should be stored in tightly closed, corrosion-resistant containers, protected from frost and away from direct sunlight, at +5 to +25°C .
- Cure
- Chemical Cure
- Supplied As
- 42% in water
- Technology
- CASE Ingredients
- Labeling Claims
- APEO-Free
- Formaldehyde-free
- Coating End Applications
- Varnishes
- Properties and Fields of use
LIOCRYL AS 610 is a good Wood and parquet floor varnishes, particularly in combination with PU dispersions such as LIOPUR 92-091. The emulsion requires solvents for film formation, e.g. 5-6% butylglycol. Combined with PU dispersion LIOPUR 92-091, varnishes can be formulated that meet the requirements for receiving the "blue angel" mark denoting environmentally safe products. The films of AS 610 are clear, hard and have good water resistance, and the necessary abrasion values for parquet floor varnishes (Taber abraser). In combination with LIOPUR 92-091, coatings on plastics with good adhesion properties are possible, though it should be borne in mind that every plastic behaves differently and requires its own formulation. The emulsion is preserved for storage. It is plasticiser- and solvent-free and contains no formaldehyde or formaldehyde-releasing products.
- Compatible Substrates and Surfaces
- Metal
- Plastics
- Wood
Technical data
Table 1 of 1
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Viscosity | 40-200 | mPas | AV-F-V005 |
| Density | approx. 1.04 | g/cm³ | AV-F-0D001 |
| Emulsifier System | Anionic | — | — |
| Minimum Film Forming Temperature | approx. 50 | °C | — |
| Non Volatile Content | 42.0 | w % | AV-F-F003 |
| pH | 6.5-7.5 | — | AV-F-P001 |
