Dar-Tech Hauthane HD-2501
- CASE Ingredients Features
- Abrasion ResistanceChemical ResistanceGood Hydrolysis ResistanceGood ToughnessOxidation ResistantWater DispersibleWater Resistance
- Chemical Family
- Polyurethanes (PU)
Dar-Tech Hauthane HD-2501 is a soft, aliphatic, polycarbonate-based, polyurethane dispersion. It was designed primarily for use on flexible substrates as a coating, saturant, or impregnate. This grade can be used as a sole vehicle or blended with acrylic emulsions for spray or rotogravure applications. It may be thickened with associative thickeners for knife-over-rolling or similar methods.
Properties
- Physical Form
- Dispersion
Identification
- CASE Ingredients Functions
- Binder & Resin
Product families
- Polyurethanes (PU)
Other characteristics
- Brand
- Dar-Tech Hauthane
- Features
Abrasion Resistance, Chemical Resistance, Good Hydrolysis Resistance, Good Toughness, Oxidation Resistant, Water Dispersible, Water Resistance
- Cure
- Air Dry
- Technology
- CASE Ingredients
- Suggested Uses
HD-2501 was designed primarily for use on flexible substrates as a coating, saturant or impregnant.
- Characteristic
Maximum hydrolytic stability and oxidation resistance; Outstanding toughness and abrasion resistance; Good water and chemical resistance; Can be crosslinked to enhance performance; Dilution and clean-up with ordinary tap water; Contains n-methyl pyrrolidone (NMP) co-solvent
- Application Methods
- Air Knife Coating
- Spray
- Chemical Inventories
- DSL (Canada)
- TSCA (USA)
- Country Availability
- Canada
- USA
- Drying Method
HD-2501 can be used as a sole vehicle or blended with acrylic emulsions for spray or rotogravure applications. It may be thickened with associative thickeners for knife-over-roll or similar methods.. HD-2501 may be air dried, if desired, depending on film thickness. Typical drying temperatures and dwell times for aqueous coatings are sufficient to produce optimal film properties.
- Certifications and Compliance
- SARA 311/312
- SARA 313
- Compatible Polymers and Resins
- Acrylics
Technical data
Table 1 of 2
8 rows| Characteristic | Value | Unit |
|---|---|---|
| Density | 8.8 | lb/gal |
| pH | 8.5 - 10.0 | — |
| Softening Point | 240.0 | ºF |
| Solid Content | 40.0 | % |
| Solids Tolerance | 0 - 2 | % |
| Sward Hardness | 10.0 | — |
| Viscosity | 75 - 200 | cps |
| VOC Content (As Supplied) | 145.0 | g/l |
Table 2 of 2
5 rows| Characteristic | Value | Unit |
|---|---|---|
| Elongation (20 Inches/Minute) | 480.0 | % |
| Modulus (100%, 20 inches/minute) | 875.0 | psi |
| Modulus (200%, 20 Inches/Minute) | 1450.0 | psi |
| Modulus (300%, 20 Inches/Minute) | 2950.0 | psi |
| Ultimate Tensile Strength | min. 7300 | psi |
