Dar-Tech Hauthane HD-2602 DMM
- CASE Ingredients Features
- Abrasion ResistanceImproves AdhesionSlip ResistanceWater Dispersible
- Chemical Family
- Polyurethanes (PU)
Dar-Tech Hauthane HD-2602 DMM is an NMP-free, APEO-free, silicone-modified, polyester-based, waterborne polyurethane dispersion. It was designed primarily for topcoat applications where slip resistance and abrasion resistance are required. HD-2602 DMM contains a non-fugitive silicone component that provides low surface tension characteristics on flexible and rigid substrates, including plastics, metals, and textiles.
Properties
- Physical Form
- Dispersion
Identification
- CASE Ingredients Functions
- Binder & Resin
Product families
- Polyurethanes (PU)
Other characteristics
- Brand
- Dar-Tech Hauthane
- End Uses
- Top Coat, Waterborne Coating
- Features
Abrasion Resistance, Improves Adhesion, Slip Resistance, Water Dispersible
- Compatible Substrates & Surfaces
- Metal, Plastics, Textiles
- Technology
- CASE Ingredients
- Suggested Uses
HD-2602 DMM was designed primarily for topcoat applications where slip and abrasion resistance properties are required. HD-2602 DMM contains a non-fugitive silicone component that provides low surface tension characteristics on flexible and rigid substrates including plastics, metals and textiles.
- Characteristic
May be formulated into low surface tension coatings; Excellent abrasion resistance; Non-fugitive silicone component; Crosslinkable for improved adhesion and performance; Contains dipropylene glycol dimethyl ether co-solvent
- Application Methods
- Gravure Coating
- Spray
- Chemical Inventories
- DSL (Canada)
- TSCA (USA)
- Country Availability
- Canada
- USA
- Coating End Applications
- Top Coat
- Waterborne Coating
- Drying Method
HD-2602 DMM may be used as a sole vehicle or blended with acrylic emulsions for spray or rotogravure applications. Rheology modifications can be made with associative thickeners for alternative application methods.. HD-2602 DMM can be air dried, if desired, depending on film thickness. Typical oven drying temperatures and dwell times for aqueous coatings are sufficient to produce optimal film properties.
- Certifications and Compliance
- SARA 311/312
- SARA 313
- Compatible Polymers and Resins
- Acrylics
- Compatible Substrates and Surfaces
- Metal
- Plastics
- Textiles
Technical data
Table 1 of 2
8 rows| Characteristic | Value | Unit |
|---|---|---|
| Density | 8.7 | lb/gal |
| pH | 7.0 - 9.5 | — |
| Softening Point | 305.0 | ºF |
| Solid Content | 35.0 | % |
| Solids Tolerance | 0 - 2 | % |
| Sward Hardness | 35.0 | — |
| Viscosity | 50 - 500 | cps |
| VOC Content (As Supplied) | 73.0 | g/l |
Table 2 of 2
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Elongation (20 Inches/Minute) | 300.0 | % |
| Modulus (100%, 20 inches/minute) | 3180.0 | psi |
| Modulus (200%, 20 Inches/Minute) | 4610.0 | psi |
| Tensile Strength (20 Inches/Minute) | min. 6375 | psi |
