Dar-Tech Hauthane HD-2113
- CASE Ingredients Features
- Abrasion ResistanceChemical ResistanceHigh GlossMar ResistanceReduced WearStain Resistance
- Chemical Family
- Polyurethanes (PU)
Dar-Tech Hauthane HD-2113 is a very hard, aliphatic, polyester-based, aqueous polyurethane dispersion specifically developed for factory-coated PVC flooring. It is ideally suited for PVC roll or sheet goods requiring maximum stain and abrasion resistance without the requirement for a 180-degree reverse bend.
Properties
- Physical Form
- Dispersion
Identification
- CASE Ingredients Functions
- Binder & Resin
Product families
Applications
- Floor Coatings
- Floor Coatings
Product Families
- Polyurethanes (PU)
Other characteristics
- Brand
- Dar-Tech Hauthane
- End Uses
- Waterborne Coating
- Features
Abrasion Resistance, Chemical Resistance, High Gloss, Mar Resistance, Reduced Wear, Stain Resistance
- Carrier
- Water
- Markets
- Building & Construction
- Paints & Coatings
- Technology
- CASE Ingredients
- Suggested Uses
HD-2113 is ideally suited for PVC roll or sheet goods requiring maximum stain and abrasion resistance without the requirement for 180 degree reverse bend.
- Characteristic
- Very high gloss
- Excellent mar and wear resistance
- Exceptional chemical and stain resistance
- Contains n-methyl pyrrolidone (NMP) co-solvent
- Application Methods
- Gravure Coating
- Rod Coating
- Spray
- Chemical Inventories
- DSL (Canada)
- TSCA (USA)
- Country Availability
- Canada
- USA
- Coating End Applications
- Waterborne Coating
- Application Method & Curing
HD-2113 may be used as supplied or blended with acrylic emulsions for application by spray, rotogravure, reverse roll, flexible blade, or wire wound rod.. HD-2113 should be dried by forced hot air or heat lamp before entering oven. The addition of 5 – 10% coalescing solvent is suggested to attain optimal film formation properties. Typical drying temperatures and dwell times for aqueous coatings are sufficient to produce optimal film properties. Maximum performance is attained with additions by weight of 4% HA-801 melamine crosslinker or 3% HA-800 aziridine crosslinker.
- Compatible Polymers and Resins
- Acrylics
- Polyvinyl Chloride (PVC)
Technical data
Table 1 of 2
8 rows| Characteristic | Value | Unit |
|---|---|---|
| Density | 8.8 | lb/gal |
| pH | 7.5 - 10.0 | — |
| Softening Point | 365.0 | ºF |
| Solid Content | 33.0 | % |
| Solids Tolerance | 0 - 2 | % |
| Sward Hardness | 60.0 | — |
| Viscosity | 75 - 200 | cps |
| VOC Content (As Supplied) | 1.05 | g/l |
Table 2 of 2
2 rows| Characteristic | Value | Unit |
|---|---|---|
| Elongation (20 Inches/Minute) | 10.0 | % |
| Tensile Strength (20 Inches/Minute) | min. 8500 | psi |
