To catalogue
ForTii® Ace MX53B
ForTii® Ace MX53B is a high-TG PPA that combines good toughness at low temperatures with chemical resistance. It is designed to replace metal in structural parts requiring high performance over a broad temperature range, from -35 °C to above 150 °C, in both dry and conditioned environments. ForTii® Ace MX53B is processed using injection molding technology and is heat stabilized. It is 50% glass-reinforced and suitable for structural parts.
Product families
Applications
Automotive & Transportation — Automotive
- Chassis & Brake
- Exterior & Body
- Interior
- Powertrain & UTH
Industrial — Chemical & Industrial Manufacturing
- Equipment & Parts
Electrical & Electronics — Devices & Assemblies
- Industrial Automation
Product Families
Plastics — Engineering & Specialty Polymers
- Polyamides
Composite Materials — Polymers & Resins
- Thermoplastic Resins
Other characteristics
- Brand
- ForTii®
- Polymer Name
- Polyphthalamide (PPA)
- Fillers Included
- Glass Fiber
- Additives Included
- Heat Stabilizer
- Processing Methods
- Injection Molding, Injection Molding
- Reinforcement Material
- Glass Fibers
- Markets
- Automotive & Transportation
- Electrical & Electronics
- Industrial
- Technology
- Composite Materials
- Plastics
- Packaging Type
- Bags
- Boxes
- Silos
- Super Sacks
- Labeling Claims
- Low Carbon Footprint (PCF)
- Material Features
- Cost Effective
- Design Flexibility
- Good Strength
- Heat Stabilized
- High Temperature Resistance
- Light Weight
- Reinforcement Form
- Tape
- Unidirectional Fabric
- Certifications and Compliance
- ISO 14001
- OHSAS
- REACH (Europe)
- Composite Materials Functions
- Resins Binders & Matrix Materials
- Composites Processing Methods
- Injection Molding
- Plastics and Elastomers End Uses
- Automotive Drivetrain
- Door Panel
- Flooring
- Robotics
- Structural Parts
- Wheel Housing Parts
- Plastics and Elastomers Functions
- Resin
- Timing Drive Systems Application Data
Stanyl® delivers best-in-class low-friction performance for improved efficiency; Stanyl® is a proven solution used by the world's top automakers; All grades are PFAS and PFOA free to ensure regulatory compliance and protect the environment; Bio-based material solutions available
- Plastics and Elastomers Processing Methods
- Injection Molding
- Structural Parts Application Data
Up to 50% weight reduction in comparison with metal; Part integration and increased design freedom; Easy and robust processing; Potential applications: engine mount/bracket, transmission parts, structural oilpan, timing chain cover, actuator and EPS housing, etc.
Technical data
Table 1 of 6
51 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Modulus | 18000 / - | MPa | ISO 527-1/-2 |
| Tensile Modulus (-40°C) | 19000 / - | MPa | ISO 527-1/-2 |
| Tensile Modulus (40°C) | 17500 / - | MPa | ISO 527-1/-2 |
| Tensile Modulus (80°C) | 17000 / - | MPa | ISO 527-1/-2 |
| Tensile Modulus (100°C) | 16800 / - | MPa | ISO 527-1/-2 |
| Tensile Modulus (120°C) | 16000 / - | MPa | ISO 527-1/-2 |
| Tensile Modulus (150°C) | 9000 / * | MPa | ISO 527-1/-2 |
| Tensile Modulus (160°C) | 7700 / * | MPa | ISO 527-1/-2 |
| Tensile Modulus (180°C) | 6200 / * | MPa | ISO 527-1/-2 |
| Tensile Modulus (200°C) | 5800 / * | MPa | ISO 527-1/-2 |
| Tensile Modulus (210°C) | 5600 / * | MPa | ISO 527-1/-2 |
| Stress at Break | 260 / - | MPa | ISO 527-1/-2 |
Table 2 of 6
12 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melting Temperature (10°C/min) | 330 / * | °C | ISO 11357-1/-3 |
| Glass Transition Temperature from DMTA (tan d) | 155 / * | °C | ASTM D5026/D7028 |
| Temperature of Deflection Under Load (1.80 MPa) | 305 / * | °C | ISO 75-1/-2 |
| Temperature of Deflection Under Load (0.45 MPa) | 320 / * | °C | ISO 75-1/-2 |
| Coefficient of Linear Thermal Expansion (parallel) | 0.27 / * | E-4/°C | ASTM D696 |
| Coefficient of Linear Thermal Expansion (parallel) | 0.14 / * | E-4/°C | ISO 11359-1/-2 |
| Coefficient of Linear Thermal Expansion (normal) | 0.3 / * | E-4/°C | ASTM D696 |
| Coefficient of Linear Thermal Expansion (normal) | 0.47 / * | E-4/°C | ISO 11359-1/-2 |
| Glow Wire Flammability Index (at thickness 3 / - mm) | 960 / - | °C | IEC 60695-2-12 |
| Glow Wire Flammability Index (at thickness 1.5 / - mm) | 700 / - | °C | IEC 60695-2-12 |
| Glow Wire Ignition Temperature (at thickness 3 / - mm) | 825 / - | °C | IEC 60695-2-13 |
| Glow Wire Ignition Temperature (at thickness 1.5 / - mm) | 725 / - | °C | IEC 60695-2-13 |
Table 3 of 6
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Electric Strength | 20 / - | kV/mm | IEC 60243-1 |
| Comparative Tracking Index | 400 / - | V | IEC 60112 |
Table 4 of 6
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Water Absorption | 3.3 / * | % | Sim. to ISO 62 |
| Density | 1620 / - | kg/m³ | ISO 1183 |
Table 5 of 6
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Molding Shrinkage (parallel) | 0.33 / * | % | ISO 294-4 |
| Molding Shrinkage (normal) | 0.85 / * | % | ISO 294-4 |
| Spiral Flow Length 1.0 mm 1000 bar | 81 / * | mm | — |
| Spiral Flow Length 1.0 mm 1200 bar | 96 / * | mm | — |
Химическая стойкость
378 rows| Characteristic | Value | Unit |
|---|---|---|
| Other | Acetaldehyde (40% by mass) at 23°C | resistant |
| Other | Acetamide (50% by mass) at 23°C | limited resistant, tests necessary to verify |
| Other | Acetamide (50% by mass) at >140°C | not resistant |
| Other | Acetic acid (10% by mass) at 100°C | not resistant |
| Other | Acetic acid (10% by mass) at 23°C | limited resistant, tests necessary to verify |
| Other | Acetic acid (95% by mass) at 23°C | not resistant |
| Other | Acetic anhydride | limited resistant, tests necessary to verify |
| Ketones | Acetone at 23°C | resistant |
| Other | Acetonitrile | resistant |
| Other | Acetophenone at 23°C | resistant |
| Other | Acetyl chloride at 23°C | not resistant |
| Other | Acetylene at 23°C | resistant |
