DeCAL 2041
- CASE Ingredients Features
- Low Viscosity
DeCAL 2041 is a derivative of a family of highly effective, low viscosity dispersing agents for waterborne coating systems. The product is especially suited for the dispersion of inorganic pigments. DeCAL 2041 is a solution of an ammonium salt of an acrylic polymer in water.
Properties
- Physical Form
- Liquid
Identification
- CASE Ingredients Functions
- Dispersant
Product families
- Dispersing & Wetting Additives
Other characteristics
- Brand
- DeCAL
- End Uses
- Waterborne Coating
- Functions
- Dispersant
- Solid Content
- 43.0 %
- Appearance
- Straw colored liquid
- Applications
DeCAL 2041 is an ideal dispersing agent for a wide range of water borne coatings.; DeCAL 2041 can be used as supplied.; The neutralizing alkali used in conjunction with the acrylic polymer can significantly impact the properties of the final coating. DeCAL 2041 releases ammonia during the drying process and therefore has little impact on water and alkaline resistance of the dry film.; Use of DeCAL 2041 should be limited to pH 5 - 10.5 and temperatures lower than 70ºC due to potential loss of volatile ammonia.; Compared with inorganic dispersing agents e.g. polyphosphate products, the organic polymer based DeCAL 2041 provides improved storage stability of both the pigment dispersion and the formulated paint. There is little or no adverse reaction to high temperatures or pH changes.
- Technology
- CASE Ingredients
- Safety and Handling
Although DeCAL 2041 is freeze stable, it is recommended to store the product at temperatures above 5ºC to enable easy handling.
- Country Availability
- Canada
- USA
- Coating End Applications
- Waterborne Coating
- Incorporation in Formulations
It is recommended to add the pigment to water containing the dispersing agent with stirring as opposed to addition of the dispersing agent to a pigment slurry. In general, the pH of the final preparation should be in the region of 8.5 to obtain dispersing efficiency.; The optimum amount of dispersing agent required to form a stable dispersion strongly depends on a pigments chemical nature, the particle surface and shape. In general, significant overdosing may deteriorate the coatings properties, eg water resistance, and also generates an economic disadvantage. Likewise, insufficient dispersing agent will lead to instability on storage.; In common with other dispersing agents, because of batch to batch variations of the demands of a specific pigment it is recommended that the formulator uses 1.5 - 2.0 times the determined optimum level of the dispersing agent.
Technical data
Table 1 of 1
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| pH | 8.0 | — | — |
| Solid Content | 43.0 | % | — |
| Active Content | 40.0 | % | — |
| Viscosity (at 25°C) | 400.0 | cps | Brookfield |
| Density (at 20°C) | 1.16 | g/cm³ | — |
